Water supply and drain pipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact....
Search Results "Edge Protection"
-
11B-606.5 Exposed pipes and surfaces
-
Catch Pools
However, an accessible route must connect to the edge of the catch pool....
-
607.4.2.3 Head End Wall
A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub. ...
-
§ 38.79(b)
(b) All thresholds and step edges shall have a band of color(s) running the full width of the step or threshold which contrasts from the step tread and riser or adjacent floor, either light-on-dark...
-
§ 38.117(b)
(b) All step edges and thresholds shall have a band of color(s) running the full width of the step or threshold which contrasts from the step tread and riser or adjacent floor, either light-on-dark...
-
§ 38.99(b)
(b) All thresholds and step edges shall have a band of color(s) running the full width of the step or threshold which contrasts from the step tread and riser or adjacent floor, either light-on-dark...
-
407.8.3.2.2 Knee and Toe Space under ICT with Obstructed Forward Reach
be permitted to provide a clear height of 9 inches (230 mm) minimum above the floor and a clear depth of 6 inches (150 mm) maximum from the vertical reference plane toward the leading edge...
-
J. Drinking Fountains
The spout and controls of the drinking fountain must be near the front edge. The controls must be usable with one hand without tight grasping, pinching, or twisting of the wrist....
-
4.4.1* GENERAL
Objects projecting from walls (for example, telephones) with their leading edges between 27 in and 80 in (685 mm and 2030 mm) above the finished floor shall protrude no more than 4 in (100...
-
11B-810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2438 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
11B-810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2438 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
11B-809.8.3 Door maneuvering clearance.
The width of the maneuvering clearance shall extend 18 inches (457 mm) beyond the strike edge at the pull side of the door....
-
Boat Slips
The pier has 120 feet of boat slip edge, which equates to three boat slips....
-
12209(b)(2)(A) Application
--The rights and protections under this Act shall, subject to subparagraph (B), apply with respect to any employee in an employment position in the House of Representatives and any employing...
-
12209(2) Establishment of remedies and procedures by instrumentalities
and procedures by instrumentalities The chief official of each instrumentality of the Congress shall establish remedies and procedures to be utilized with respect to the rights and protections...
-
§100.400(c)(4)
Intimidating or threatening any person because that person is engaging in activities designed to make other persons aware of, or encouraging such other persons to exercise, rights granted or protected...
-
704.2.1.2 Forward Approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
703.2 Raised Characters
Signs that are designed to be read by touch should not have sharp or abrasive edges....
-
703.2 Raised Characters
Signs that are designed to be read by touch should not have sharp or abrasive edges....
-
703.2 Raised Characters
Signs that are designed to be read by touch should not have sharp or abrasive edges....
-
T405.3 Visual Contrast
The outer edge of step treads shall be marked by a stripe....
-
§ 37.42(e)
a commuter or intercity rail operator shall not employ a solution that has the effect of channeling passengers into a narrow space between the face of the higher-level platform and the edge...
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers. ...
-
Can handrails overlap ramp landings?
Along runs and landings, the minimum clear width must be measured between the leading edge of handrails....