Transfer supports, stirrups, and reclining surfaces shall comply with M301.3.
Search Results "Adult Changing Table"
-
M301.3 Supports
-
M301.3.3 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided. Where the incline of the back support can be modified while in use, head and...
-
M305.2.8 Fittings (Section-by-Section Analysis)
Specifically, one commenter (manufacturer) asserted that the technical criteria from the 2004 ADA and ABA Accessibility Guidelines for grab bars in bathrooms should not be applied to exam tables...
-
M305.2.2 Length (Section-by-Section Analysis)
imaging equipment with transfer surfaces less than or equal to 24 inches deep, the Committee recommended requiring a transfer support to extend horizontally along the side of the patient table...
- Mockett TLKNB27 Original Kyros Leg 5" Base
-
6.13 Outdoor Constructed Features
Where provided on circulation paths or beach access routes at beaches, outdoor constructed features such as picnic tables, grills or water hydrants, shall comply with technical provisions...
-
M303.3.3 Ramped (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry of a wheelchair space, level changes greater than ½ inch high would be required to be ramped and comply with...
-
Safe Harbor
As indicated in the title of this table, the Safe Harbor provision applies only to barrier removals, not to new construction. ...
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3....
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3....
-
M301.2.1 Adjustability (Section-by-Section Analysis)
(Significant Changes – Transfer Surface Adjustability), in the final rule the Access Board has renamed this provision and now requires the transfer surface height to be adjustable to: (1...
-
Side reach (Section-by-Section Analysis)
If the pay phones comply with the 1991 Standards, the adoption of the 2010 Standards does not require retrofitting of these elements to reflect incremental changes in the 2010 Standards....
-
Side reach (Section-by-Section Analysis)
If the pay phones comply with the 1991 Standards or UFAS, the adoption of the 2010 Standards does not require retrofitting of these elements to reflect incremental changes in the 2010 Standards...
-
5.4.1 Transfer Support Location for M301 and M302
Figure 5.4.1 Location and Length of Transfer Supports (SOURCE: Midmark Corporation) A: Table seat depth, 17 inches minimum B: Transfer support length, 15 inches minimum C: Distance...
-
M303.3 Entry (Section-by-Section Analysis)
This is an introductory section.
-
1.1.9 Horizontal gaps and vertical alignment
1.1.9 Horizontal gaps and vertical alignment. Measure for local horizontal discontinuities and variations in vertical alignment such as at concrete joints, gaps, grade breaks, and at...
-
§ 38.95(b)(8) Platform entrance ramp
(8) Platform entrance ramp. The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, when measured on level ground, for a maximum rise of 3 inches,...
-
PEMKO 2 1/2" Saddle Threshold No. 166
Requires the Premium User plan or above. (Login or upgrade your account!)
-
PEMKO 5 1/8" Thermal Barrier Threshold No. 252X3-FG
Requires the Premium User plan or above. (Login or upgrade your account!)
-
PEMKO 5" Saddle Threshold No. 1665
Requires the Premium User plan or above. (Login or upgrade your account!)
-
PEMKO 8 1/8" Thermal Barrier Threshold No. 254X4-FG
Requires the Premium User plan or above. (Login or upgrade your account!)
-
PEMKO 5 1/2" Half Saddle/Offset Saddle Threshold No. 158
Requires the Premium User plan or above. (Login or upgrade your account!)
-
PEMKO 4" Latching Panic Saddle Threshold No. 278x224-FGT
Requires the Premium User plan or above. (Login or upgrade your account!)
-
PEMKO 7" Heavy Duty Threshold No. 1717
Requires the Premium User plan or above. (Login or upgrade your account!)