inch maximum curb in transfer-type showers in alterations to existing facilities, where recessing the compartment to achieve a ½-inch curb will disturb the structural reinforcement of the floor...
Search Results "Clear Floor Area"
-
Shower Compartments
-
M301.4 Lift Compatibility
M01.4.1 Clearance in Base Proposed requirement: The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor...
-
Lines of Sight for Wheelchair Spaces
In addition, an exception from the lines of sight and dispersion requirements is provided for wheelchair spaces in team or player seating areas serving areas of sports activity....
-
Transfer Heights
that the majority of WMDs (92% of subjects in the first phase and the 5th percentile (or approximately 94% in this study) could transfer within one inch of the mean wheelchair seat to floor...
-
Background:
, the entity shall make the alteration in such a manner that, to the maximum extent feasible, the path of travel to the altered area and the bathrooms, telephones, and drinking fountains...
-
4. Parks
More specifically, Kirola stated that "the accessible entrance is steep to use," RT 1385:5; that she was "not able to get in the children's play area," RT 1385:14-15; and that there were...
- AJW Architectural Products U124 40 oz. Horizontal Liquid Soap Dispenser - Surface Mounted
- HEWI Range 180 Glass Door Hardware
-
ACCESSIBLE ELEMENT
An ACCESSIBLE ELEMENT can include a room, area, route, feature or device which provides accessibility for persons with disabilities.◼...
-
804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1525...
-
11B-608.1 General
Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom because the shower area provides additional maneuvering space....
-
68.101(c)(5) Existing buildings
In an existing building or facility, where alterations are not planned or the planned alterations will not affect an area containing a primary function, the following minimum requirements...
-
USE ZONE
[DSA-AC] The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 for unrestricted circulation around the play equipment...
-
§ 37.131(a)(1)(i)
The corridor shall include an area with a three-fourths of a mile radius at the ends of each fixed route....
-
11B-608.1 General
Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom because the shower area provides additional maneuvering space. ◼...
-
USE ZONE
[DSA-AC] The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 for unrestricted circulation around the play equipment...
- ADA25: #17 of 25 -- Recreation
-
§382.157(c)
Data concerning a passenger's disability must be recorded separately in the following areas: vision impaired, hearing impaired, vision and hearing impaired, mentally impaired, communicable...
-
Swimming Pools
Pool walls at diving areas and in areas where swimmers cannot enter because of landscaping or adjacent structures are still counted as part of the pool’s total linear feet....
-
F228 Depositories, Vending Machines, Change Machines, and Mail Boxes
similar exception was not included in the corresponding provision for facilities covered by the ADA because such facilities are held to a different level of access with respect to work areas...
-
Accessible Routes
must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
Multi-tasking
computer while talking on phone) Identify tasks that must be performed simultaneously and tasks that can be performed individually Provide specific feedback to help employee target areas...
-
A. Finish and Contrast
Contrast in percent shall be determined by: Contrast=[B−B)/B] × 100 Where B = light reflectance value (LRV) of the lighter area and B = light reflectance value (LRV) of the darker...
-
11B-705.1.1.3.2
Contrast in percent shall be determined by: Contrast percent = [(B1-B2)/B1] x 100 percent where B1 = light reflectance value (LRV) of the lighter area and B2 = light reflectance...
