The guidelines require tubs to have shower spray units that can be used as both a fixed position shower head and a hand-held shower (607.6)....
Search Results "Shower Grab Bar"
Commonly Searched Documents
- 
    
  
  Shower Spray Unit
  
 - 
    
  
  § 38.29(b)
  
(b) Handrails and stanchions shall be provided in the entrance to the vehicle in a configuration which allows persons with disabilities to grasp such assists from outside the vehicle...
 - 
    
  
  Size and Clearances [4.21.2]
  
Recommendation:Placing them beyond this space however can provide easier maneuvering to and from the shower. When a seat is provided in a roll-in shower, it must be a folding seat....
 - 
    
  
  Transfer Compartments
  
Seats are required in transfer compartments and roll-in showers in transient lodging guest rooms (608.4)....
 - 
    
  
  11B-610.3.2 L-shaped seats
  
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall. The rear edge of...
 - 
    
  
  11B-809.4.1 Subsequent bathrooms
  
In residential dwelling units with more than one bathroom, when a bathtub is installed in the first bathroom in compliance with Section 11B-809.4 and a shower compartment is provided in...
 - 
    
  
  11B-608.5.1  Reserved
  
[See subsections ...]
 - AccessaBath Shower Systems
 - 
    
  
  4.34.5.6 BATHTUB AND SHOWER ENCLOSURES
  
Enclosures for bathtubs or shower stalls shall not obstruct controls or transfer from wheelchairs onto shower or bathtub seats....
 - 
    
  
  7(2)(a)
  
(a) Bathrooms that have reinforced walls for grab bars (see Requirement 6) would meet section 100.205(c)(3)(iv) if: Note: Cabinets under lavatories are acceptable provided the bathroom...
 - 
    
  
  1134A.6, Item 2
  
The maximum slope of the shower floor shall be ½ inch (12.7 mm) per foot in any direction and shall slope to a drain....
 - 
    
  
  1134A.6, Item 2
  
The maximum slope of the shower floor shall be ½ inch (12.7 mm) per foot in any direction and shall slope to a drain....
 - 
    
  
  608.2.2.1 Clearance
  
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
 - Bobrick Extra-Heavy-Duty Surface-Mounted Towel Bar B-530 x 18
 - Bobrick Extra-Heavy-Duty Surface-Mounted Towel Bar B-530 x 24
 - 
    
  
  11B-212 Kitchens, kitchenettes, wet bars and sinks
  
212 Kitchens, Kitchenettes, and Sinks ETA Editor’s Note The CBC includes wet bars. Therefore, the CBC is more inclusive....
 - 
    
  
  11B-608.4 Seats
  
A folding seat shall be provided in roll-in type showers and transfer type shower compartments. Seats shall comply with Section 11B-610. [2010 ADA Standards] 608.4 Seats....
 - 
    
  
  608.2.2.1 Clearance
  
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
 - 
    
  
  608.2.2.1 Clearance
  
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
 - 
    
  
  Seat [4.21.3]
  
Seat [4.21.3] ADAAG specifies maximum seat dimensions. Minimum dimensions contained in the CABO-ANSI A117.1‒1992 standard are acceptable. The seat must extend the full depth of...
 - 
    
  
  7. Seat Transfer
  
Are the roll-in showers free of doors that would impede wheelchair transfer onto the seat? [ADA Stds. 4.21.8] Yes __ No __ N/A __ Comments: _______________________________________...
 - 
    
  
  11B-608.4 Seats
  
A folding seat shall be provided in roll-in type showers. Seats shall comply with Section 11B-610. [2010 ADAS] 608.4 Seats. ...
 - 
    
  
  11B-608.4 Seats
  
A folding seat shall be provided in roll-in type showers. Seats shall comply with Section 11B-610. [2010 ADAS] 608.4 Seats....
 - 
    
  
  11B-809.10.6 Showers
  
Showers required by Section 11B-809.10 shall comply with this section....