1.1.10 Ramps....
Search Results "Play Area Ramp"
Filters
Commonly Searched Documents
-
1.1.10 Ramps
-
Work Areas
Work Areas Storage facilities used by employees for purposes other than job-related tasks, such as break room cabinets and shower room lockers, are required to be accessible....
-
§ 38.23(c)(2) Ramp surface
(2) Ramp surface....
-
§ 38.83(c)(2) Ramp surface
(2) Ramp surface....
-
II-6.6000 Curb ramps.
[Insert the following text at the end of this section.] Resurfacing beyond normal maintenance is an alteration. Merely filling potholes is considered to be normal maintenance.
-
§ 38.125(c)(2) Ramp surface
(2) Ramp surface....
-
1. New Curb Ramp Construction and Alterations
New Curb Ramp Construction and Alterations 36....
-
11B-705.1.2.2 Curb ramps
Detectable warnings at curb ramps shall extend 36 inches (914 mm) in the direction of travel....
-
11B-1002.3 Load and unload areas
A turning space complying with Sections 11B-304.2 and 11B-304.3 shall be provided in load and unload areas....
-
R409.10.1 Top and Bottom Extension at Ramps
R409.10.1 Top and Bottom Extension at Ramps. Ramp handrails shall extend horizontally above the landing for 305 mm (1.0 ft) minimum beyond the top and bottom of ramp runs....
-
11B-406.5.9 Clear space at diagonal curb ramps
The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway....
-
11B-406.5.9 Clear space at diagonal curb ramps
The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway....
-
11B-406.5.9 Clear space at diagonal curb ramps
The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway....
-
1008.2.5.3.1 Handrail Gripping Surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum. Where the shape of the gripping...
-
1008.2.5.3.1 Handrail Gripping Surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum. Where the shape of the gripping...
-
§ 35.150(b)(5) Exemption for small facilities
(5) Exemption for small facilities. For measures taken to comply with the program accessibility requirements of this section, existing facilities shall comply with the applicable...
-
1008.2.5.3.1 Handrail Gripping Surfaces
1008.2.5.3.1 Handrail Gripping Surfaces. Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm)...
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum. Where the shape of the gripping...
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum. Where the shape of the gripping...
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum. Where the shape of the gripping...
-
4.8.5(1)
(1) Handrails shall be provided along both sides of ramp segments. The inside handrail on switchback or dogleg ramps shall always be continuous....
-
11B-247.1.2.2 Curb ramps
Curb ramps shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.2. ...
-
C1-5. Curb Ramp
Where an accessible route crosses a curb is a curb ramp provided? If yes, Yes _____ No _____...
-
11B-247.1.2.2 Curb ramps
Curb ramps shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.2....