Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 30 percent maximum of the height of the character....
Search Results "Numeric Character"
-
T702.5 Stroke Thickness
-
BACKGROUND
MSHA is a corporation that owns, controls, and/or operates numerous healthcare facilities in Tennessee and Virginia. ...
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements. ...
-
D. Signage
Existing tactile signage will be relocated to between 48 inches measured to the baseline of the lowest tactile character and 60 inches measured to the baseline of the highest tactile character...
-
11B-411.2.1.2.1 Keypads
Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised dot....
-
11B-411.2.1.2.1 Keypads
Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised dot....
-
11B-407.4.8.1.3 Floor arrival
As the car passes a floor and when a car stops at a floor served by the elevator, the corresponding character shall illuminate. Exception: Reserved....
-
703.6.1 Pictogram Field
Characters and braille shall not be located in the pictogram field....
-
R410.7 Height from Finish Surface
Visual characters shall be 1.0 m (3.25 ft) minimum above the finish surface....
-
§8.3 Substantial impairment
Substantial impairment means a significant loss of the integrity of finished materials, design quality, or special character resulting from a permanent alteration....
-
703.6.1 Pictogram Field
Characters and braille shall not be located in the pictogram field....
-
5d.
Are raised letters and Braille characters used to identify each floor button and each control? [ADA Stds 4.10.12] Yes _____ No _____...
-
M1
.), is a sign with raised characters and Braille mounted on the wall adjacent to the latch side of the door and centered 60 inches above the floor?...
-
R410.8 Stroke Thickness
Stroke thickness of the uppercase letter "I" shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
703.5.7 Stroke Thickness
Stroke thickness of the uppercase letter "I" shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
Comments on specific provisions of proposed ADAAG (Preamble, Section-by-Section Analysis)
Comments on specific provisions of proposed ADAAG During the course of accepting comments on its proposed rule, the Department received numerous comments on ADAAG....
-
11B-406 CURB RAMPS, BLENDED TRANSITIONS AND ISLANDS
406 Curb ramps, blended transitions and islands [2010 ADAS] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADAS Section 406 and 2013 CBC Section 11B-406 are numerous...
-
11B-411.2.1.2.5 Audio output
function button, the audio output shall provide verbal announcements, including but not limited to, operating instructions, user input confirmation, announcement of the elevator assignment characters...
-
11B-703.3 Braille
Contracted Braille uses special characters called contractions to make words shorter....
-
1009.11 Instructions
Signage shall comply with Chapter 11A, Section 1143A or Chapter 11B, Section 11B-703.5 requirements for visual characters....
-
11B-703.3 Braille
Contracted Braille uses special characters called contractions to make words shorter....
-
11B-411.2.1.2.5 Audio output
function button, the audio output shall provide verbal announcements, including but not limited to, operating instructions, user input confirmation, announcement of the elevator assignment characters...