(5) In determining the site or location of a facility, an applicant for assistance or a recipient may not make selections...
Search Results "Mobility Aid Seating Location"
Filters
Commonly Searched Documents
-
§104.4(b)(5)
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
F233.3.1.1 Residential Dwelling Units with Mobility Features
On military installations with residential dwelling units, at least 5 percent, but no fewer than one unit, of the total number of residential dwelling units shall provide mobility features...
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
Identification of available accessible seating. (Section-by-Section Analysis)
For example, if a seating map displays color-coded blocks pegged to prices for general seating, then accessible seating must be similarly color-coded....
-
Identification of available accessible seating. (Section-by-Section Analysis)
In the NPRM, the Department proposed in § 35.138(d) that a public entity, upon being asked, must inform persons with disabilities and their companions of the locations of all unsold or otherwise...
-
11B-221.2.3.1 Horizontal dispersion
Exceptions: Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by Section 11B-221.3 and wheelchair spaces are located...
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
American Specialties Retractable Shower Seat Model 170
Requires the Premium User plan or above. (Login or upgrade your account!) -
4.3 Locker Room Barriers and Solutions
Solutions Easy/Low cost Involved / High cost Not enough space in front of the lockers Ask staff to permanently assign you a locker in an accessible location...
-
11B-208.3.1 General
Parking spaces complying with Section 11B-502 that serve a particular building or facility shall be located on the shortest accessible route from parking to an entrance complying with Section...
-
§ 36.303(d)(1)
an interactive voice response system, for receiving and directing incoming telephone calls, that system must provide effective real-time communication with individuals using auxiliary aids...
-
11B-233.3.1.1 Residential dwelling units with mobility features
In public housing facilities with residential dwelling units, at least 5 percent, but no fewer than one unit, of the total number of residential dwelling units shall provide mobility features...
-
11B-233.3.1.1 Residential dwelling units with mobility features
In public housing facilities with residential dwelling units, at least 5 percent, but no fewer than one unit, of the total number of residential dwelling units shall provide mobility features...
-
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
6. Amend 28 CFR part 35 by adding § 35.137 to read as follows:
6. Amend 28 CFR part 35 by adding § 35.137 to read as follows:
-
Bathroom Do’s and Dont’s
Some guests prefer using the rubber mat to help stabilize mobility aid devices. ...
-
1002.5 Amusement Ride Seats Designed for Transfer
1002.5 Amusement Ride Seats Designed for Transfer. Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading....
