Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
Search Results "Examination Equipment"
Commonly Searched Documents
-
M303.3.2 Beveled
-
M303.1 General (Section-by-Section Analysis)
This is an introductory section.
-
M303.2.4 Knee and Toe Clearance
Wheelchair spaces shall include knee and toe clearance complying with M303.2.4. The depth of the wheelchair space shall include knee and toe clearance of 17 inches (430 mm) minimum...
-
M303.3.1 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.
-
M303.3.2 Beveled
Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
-
vii. Ancillary equipment
Ancillary equipment Ancillary equipment is equipment used with other medical equipment, such as examination tables or chairs or MRIs, and adapted to or adjustable for use by individuals...
-
F201.3 Temporary and Permanent Structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in F203.2....
-
201.3 Temporary and Permanent Structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in 203.2...
-
11B-201.3 Temporary and permanent structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in 203.2....
-
11B-201.3 Temporary and permanent structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in 203.2. ...
-
201.3 Temporary and Permanent Structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in 203.2. ...
-
11B-201.3 Temporary and permanent structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in Section 11B-203.2. ◼...
-
Sections 35.108(d)(2) and 36.105(d)(2)—Predictable Assessments
Sections 35.108(d)(2) and 36.105(d)(2)—Predictable Assessments In the NPRM, proposed §§ 35.108(d)(2) and 36.105(d)(2) set forth examples of impairments that should easily be found...
-
Medical Examinations
Medical Examinations An employer may only make medical examinations or inquiries of an employee regarding disability if such examinations are job-related and consistent with business...
-
(1) Adjustability: Minimum High Transfer Height
In the preamble to the MDE NPRM, the Access Board sought comment in question 14 on whether the final rule should require an adjustable height range of 17 inches to 25 inches; whether equipment...
-
11B-805.4 Examination, diagnostic and treatment rooms
Examination, diagnostic and treatment rooms shall comply with Section 11B-805.4....
-
5. Edge Protection
The Access Board sought public input with question 30 in the MDE NPRM preamble, on whether there is diagnostic equipment with wheelchair spaces on raised platforms that does not provide...
-
M303.3.3.3 Clear Width
The clear width of ramp runs shall be 36 inches (915 mm) minimum.
-
M303.3.3.1 Running Slope
Ramp runs shall have a running slope not steeper than 1:12. EXCEPTION: A running slope not steeper than 1:8 shall be permitted for ramp runs with a maximum height of 2 ½ inches...
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side with a drop off.
-
M303.3.3.5 Handrails
Ramps with a rise greater than 6 inches (150 mm) shall provide handrails on both sides.
-
Section 1193.33 Accessibility and usability
Section 1193.33 Accessibility and usability Section 1193.33 requires that, where readily achievable, manufacturers must (1) provide a description of the accessibility and...
-
M303.3.3.5 Handrails
Ramps with a rise greater than 6 inches (150 mm) shall provide handrails on each side.
-
M303.3.3.3 Clear Width
The clear width of ramp runs shall be 36 inches (915 mm) minimum.