Electrical receptacles, switches and controls complying with Section 11B-809.12. 8. Faucets complying with Section 11B-809.10.8.6. 9....
Search Results "EVCS: Electric Vehicle Charging Station"
-
11B-233.3.1.2.6.5 Additional requirements.
-
§ 37.9(b)
(b) Facility alterations begun before January 26, 1992, in a good faith effort to make a facility accessible to individuals with disabilities may be used to meet the key station requirements...
-
Floor and Ground Surfaces: ADA Standard Section 503.4
Section 503.4 covers the current ADA Standards for the floor and ground surfaces at passenger loading zones.
-
§ 35.151(b)(4)(i)(B)
(B) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of or access...
-
§ 35.151(b)(4)(i)(B)
(B) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of or access...
-
11B-810.9 Escalators
Exception: Existing escalators in key stations shall not be required to comply with Section 11B-810.9....
-
11B-810.9 Escalators
Exception: Existing escalators in key stations shall not be required to comply with Section 11B-810.9....
-
11B-810.9 Escalators
Exception: Existing escalators in key stations shall not be required to comply with Section 11B-810.9....
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable.
-
T303 Handrails, Stanchions, and Handholds
[See subsections ...]
-
T210 Wheelchair Spaces
[See subsections ...]
-
T214 Operable Parts
[See subsections ...]
-
T207 Handrails, Stanchions, and Handholds
[See subsections ...]
-
14. In § 38.93(d)(3)
§ 38.93 [Amended] 14. In § 38.93(d)(3), remove the period at the end of the paragraph and add the following words: “,ensuring compliance with section 37.42, where applicable.” in...
-
1012.5 Slope
The slope of the surface of parking spaces and pull-up spaces shall not be steeper than 1:48 in any direction. EXCEPTION: Where the surface is other than asphalt, concrete, or...
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable.
-
§ 37.197 Remanufactured OTRBs
[See subsections ...]
-
§ 38.23(b)(1) Design load
(1) Design load. The design load of the lift shall be at least 600 pounds. Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift...
-
§ 38.29(d)
(d) Handrails and stanchions shall be sufficient to permit safe boarding, on-board circulation, seating and standing assistance, and alighting by persons with disabilities.
-
§ 38.27 Priority seating signs
[See subsections ...]
-
§ 38.159(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second (150 mm/sec) during lowering and lifting an occupant, and shall not exceed 12...
-
C. Visibility Through a Window
C. Visibility Through a Window. Care should be taken so that the lift does not obscure the vision of the person occupying the securement position.
-
§ 38.23(b)(12) Use by standees
(12) Use by standees. Lifts shall accommodate persons using walkers, crutches, canes or braces or who otherwise have difficulty using steps. The platform may be marked to indicate a...
-
§ 38.83(c)(1) Design load
(1) Design load. Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26...