(b) The height of the water closet should be 17 inches (430 mm) to 19 inches (485 mm) measured to the top of the toilet seat. Seats should not be sprung to return to a lifted...
Search Results "Bus Ramp"
Filters
Commonly Searched Documents
-
(1)(b)
-
§ 37.3 Small operator
Small operator means, in the context of over-the-road buses (OTRBs), a private entity primarily in the business of transporting people that is not a Class I motor carrier. To...
-
§ 38.159(d)(6) Stowage
(6) Stowage. When not being used for securement, or when the securement area can be used by standees, the securement system shall not interfere with passenger movement, shall not...
-
§ 38.159(b)(2)(ii) Exception
(ii) Exception. Where the lift is designed to deploy with its long dimension parallel to the vehicle axis and which pivots into or out of the vehicle while occupied (i.e., “rotary...
-
§ 38.153(c)(1)
(1) Doors shall have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper...
-
§ 37.7(c)
(c) Over-the-road buses acquired by public entities (or by a contractor to a public entity as provided in §37.23 of this part) shall comply with §38.23 and subpart G of part 38 of...
-
§ 38.21 General
[See subsections ...]
-
§ 38.153 Doors, steps and thresholds
[56 FR 45756, Sept. 6, 1991, as amended at 63 FR 51698, 51702, Sept. 28, 1998]
-
Automated Announcement Systems
ago, transit users with disabilities, along with transportation researchers, continue to identify inadequate stop and route announcements as significant impediments to the use of public bus...
-
§ 38.23(c)(8) Handrails
grasp them from outside the vehicle while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches and 38 inches above the ramp...
-
§ 38.95(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
Re: 405 Ramps
Gentlemen/Ladies: While the code requires a 60"x 60" clear landing, does it have to be square? Please see attached and advise, thank you.
-
DSA Drawing 11B-406-8C Curb Ramp Adjoining a Parking Access Aisle with No Gutter (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
F. What are Pedestrian Crossings and Where Must Curb Ramps be Provided?
Where and when curb ramps are required depends on the location and the age of streets and sidewalks....
-
SafePath VulcanLanding™ Rubber Transition Ramp
Modifying vertical rises at door thresholds often requires more than just a ramp, it requires a level-landing, otherwise known as maneuverable clearance area, a firm and stable level surface...
-
7 [§ 4.7.8]
7 [§ 4.7.8] Curb ramps must be located where they will not be obstructed by parked vehicles....
-
§ 38.83(c)(3) Ramp threshold
(3) Ramp threshold....
-
EZ-ACCESS The Gateway™ Solid Surface Portable Ramp Video
Requires the Registered User plan or above. Login! -
Top Landings
Commenters advised that landings should be specified at the top of curb ramps. Response....
-
Ramps M303:3.3, 3.3.1, 3.3.2
ramped surface...
-
Detectable Warning Surfaces on Curb Ramps (Section-by-Section Analysis)
on curb ramps....
-
Beneficial Designs High Efficiency Trail Assessment Process (HETAP) Software 3.0 Wheeled Instrumentation Sensor Package for Data Collection
Key HETAP and UTAP Differences HETAP follows the same general principles as its predecessor, UTAP (the Universal Trail Assessment Process). Both collect objective trail...
-
11B-705.1.1.3 Color and contrast
Replacement of less than 20 percent of existing detectable warnings at a single contiguous location shall be permitted to be in-kind at existing curb ramps, islands, or cut-through medians...
