The outdoor recreation access route shall connect the distinct viewing locations, accessible outdoor constructed elements, and other accessible elements, accessible spaces, and accessible...
Search Results "Adjusted Construction Cost"
Filters
Commonly Searched Documents
-
3.4.8 Viewing Areas Accessed by Vehicular Ways
-
Compliance Dates
Compliance Dates On or after March 15, 2012 All newly constructed or altered facilities of public entities and public accommodations, including pools, must comply with the 2010 Standards...
-
Planning and Designing Outdoor Recreation Facilities for Horses
"Equestrian Design Guidebook for Trails, Trailheads, and Campgrounds," a comprehensive technical resource, details those elements of planning, design, and construction that are specific...
-
7.4.10.2 Outdoor Recreation Access Routes (ORARs)
section 2.0 shall connect the following places at trailheads: Accessible parking spaces or other arrival point; Starting point of the trail; and Accessible outdoor constructed...
-
M301.4.1 Clearance in Base
The base of diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep...
-
Figure M2: M301.4 Lift Compatibility
(at Diagnostic Equipment for Use by a Patient in a Supine, Prone, or Side-Lying Position)
-
M301.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
1011.6 Water Spouts
Water spouts at water hydrants and water utility hook-ups shall be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum above the ground.
-
1011.6 Water Spouts
Water spouts at water hydrants and water utility hook-ups shall be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum above the ground.
-
1.1.10 Ramps
1.1.10 Ramps. Measure accessible ramps for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with Sections...
-
1.1.14 Flatness of ramp cross slope
1.1.14 Flatness of ramp cross slope. For ramps, measure flatness of cross slope by placing a 24 - in. (600 mm) digital inclinometer perpendicular to the line of travel at 4 ft (1200...
-
1.1.16 Alternate measurement tools
1.1.16 Alternate measurement tools. Ramps may be measured with instruments other than a digital inclinometer if they provide the data required for evaluation of tolerances as given...
-
1.1.6 Flatness of walk cross slope
1.1.6 Flatness of walk cross slope. For walks and other pedestrian paths, measure flatness of the cross slope by placing a 24 - in. (600 mm) digital inclinometer perpendicular to the...
-
Husky 24" Line Generator Digital Laser Level
It is great for checking floors, walls and ceilings during construction....
-
BENEFITS AND COSTS: OVERVIEW
BENEFITS AND COSTS: OVERVIEW Based on our analysis, we determined that transfer surface height requirements lower than 19 inches would increase the cost of designing and manufacturing...
-
Implication for Standards and Design
allowed for evaluating the presence/absence of various height grab bars, a backrest added in parallel to the front edge of the transfer surface, a variable width transfer surface, and adjustable...
-
Brewer Assist Power Procedure Table™
Brewer Assist Power Procedure Table™
-
ALTERATION
Any construction or renovation to an existing structure other than repair or addition....
-
Kompan, Inc. M243P - Crocodile Bench
Requires the Premium User plan or above. (Login or upgrade your account!) -
II. GENERAL NONDISCRIMINATION REQUIREMENTS
Failing or refusing to design and construct QuikTrip Stores that are readily accessible to and usable by individuals with disabilities in full compliance with 42 U.S.C. § 12183(a)(1), 28...
-
Facility
Facilities must comply with all 2010 ADA Standards for Accessible Design for new construction and remodeling projects....
-
Costs of Adaptation
All costs associated with incorporating the new design and construction requirements of the Fair Housing Act are borne by the builder....
-
11B-809.8 Doors
Exterior landings of impervious construction (e.g., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than 1/2 inch (12.7 mm) of change...
