Fitness rooms need to provide an accessible path of travel to all different types of equipment....
Search Results "Accessibility Requirement"
Filters
Commonly Searched Documents
-
Amenities
-
4.Information, documentation, and training
Manufacturers should include in general product information the contact method for obtaining the information required by this section....
-
Figure 404.2.4.1(k) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side with Closer – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(i) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side with Closer – Drawing from the U.S. Access Board
-
M301.1 General (Section-by-Section Analysis)
The MDE NPRM proposed that all diagnostic equipment used by patients in a supine, prone, or side-lying position must comply with the technical requirements of proposed section M301....
-
Section 37.25 University Transportation Systems
The nature of the systems involved—demand-responsive or fixed route—determines the precise requirements involved....
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
The Access Board sought input in question 25 in the MDE NPRM preamble, on whether the proposed dimensions for the clearance in base requirement is sufficient to allow for the use of portable...
-
229 Windows
229 Windows A new requirement at section 229.1 of the 2010 Standards provides that if operable windows are provided for building users, then at least one window in an accessible space...
-
Thresholds at Doorways
The 1991 Standards, at section 4.13.8, require the height of thresholds at doorways not to exceed ½ inch and thresholds at exterior sliding doors not to exceed ¾ inch....
-
1010.1.9.1 Hardware
Door handles, pulls, latches, locks and other operating devices on doors required to be accessible by Chapter 11A or 11B shall not require tight grasping, tight pinching or twisting of the...
-
11B-104.1.1 Construction and manufacturing tolerances
Specifying dimensions in design in the manner described above will better ensure that facilities and elements accomplish the level of accessibility intended by these requirements....
-
State and Local Government Facilities: Guidance on the Revisions to 28 CFR Section 35.151
35.151(a), which provided that those facilities that are constructed or altered by, on behalf of, or for the use of a public entity shall be designed, constructed, or altered to be readily accessible...
-
M302.4 Lift Compatibility (Section-by-Section Analysis)
M302.4.1) or clearance around base (proposed M302.4.2) technical requirements....
-
4.1.3(17)(a)
(a) If public pay telephones, public closed circuit telephones, or other public telephones are provided, then they shall comply with 4.31.2 through 4.31.8 to the extent required by the following...
-
Section 35.151 New construction and alterations (Section-by-Section Analysis)
35.151(a), which provided that those facilities that are constructed or altered by, on behalf of, or for the use of a public entity shall be designed, constructed, or altered to be readily accessible...
-
111.2 Certificate issued
A statement that the described portion of the structure has been inspected for compliance with the requirements of this code for the occupancy and division of occupancy and the use for which...
-
A. Executive Order 12866 (Regulatory Planning and Review), Executive Order 13563 (Improving Regulation and Regulatory Review), and DOT Regulatory Policies and Procedures
This rule promotes such values by requiring the removal of barriers to equal access to air transportation information and services for passengers with disabilities....
-
Alterations and Additions [F245.2.3]
When altering or adding picnic units to an existing picnic facility, the scoping requirements apply only to the picnic units that are altered or added until the required minimum number of...
-
11B-604.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
III-3.1000 General
The specific requirements discussed below in III−4.0000 are all designed to effectuate the general requirements....
-
Appendix 4 – References
AS1428.1-2001 Design for access and mobility—Part 1: general requirements for access—new building work. Sydney, Australia: Standards Australia International....
-
224.6 Housing at a Place of Education
Housing at a place of education shall comply with the provisions applicable to transient lodging, including, but not limited to, the requirements for transient lodging guest rooms in sections...
-
Utility and Sewage Hookups [1011.2, 1011.3, and 1011.6]
Sewage hatches do not have to comply with the technical requirements for operable parts....
-
204.1 General
Within areas of sport activity, protruding objects on circulation paths shall not be required to comply with 307. 2....
