Additions and alterations to existing buildings or facilities shall comply with Section 11B-202....
Search Results "Shall"
Filters
Commonly Searched Documents
-
11B-202.1 General
-
11B-213.3.5 Mirrors
Where mirrors are provided, at least one shall comply with Section 11B-603.3....
-
11B-406.4.1 Slope
Blended transitions shall have a running slope not steeper than 1:20....
-
11B-807.2.1 Turning space
Turning space complying with Section 11B-304 shall be provided within the cell....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-309.2 Clear floor space
A clear floor or ground space complying with Section 11B-305 shall be provided....
-
11B-807.3 Cells with communication features
Cells required to provide communication features shall comply with Section 11B-807.3....
-
11B-904.3.3 Check writing surfaces
Where provided, check writing surfaces shall comply with Section 11B-902.3....
-
11B-223.4 Professional offices of health care providers
Professional offices of health care providers shall comply with Section 11B-805....
-
11B-603.2.1 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
1007.4 Elevators
In order to be considered part of an accessible means of egress, an elevator shall comply with the emergency operation and signaling device requirements of California Code of Regulations...
-
11B-1002.2 Accessible routes
Accessible routes serving amusement rides shall comply with Division 4. Exceptions: 1. ...
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor...
-
§ 382.37 Seat assignments
(a) Carriers shall not exclude any qualified individual with a disability from any seat in an exit row or other location or require that a qualified individual with a disability sit in any...
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic doors and automatic gates shall comply with Section 11B-404.3. Full-powered automatic doors shall comply with ANSI/BHMA A156.10 ....
-
11B-233.3 Residential dwelling units provided by entities not subject to HUD Section 504 Regulations
dwelling units provided by entities not subject to regulations issued by the Department of Housing and Urban Development (HUD) under Section 504 of the Rehabilitation Act of 1973, as amended, shall...
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
Access Board “shelf space” shall be calculated by linear feet and drawers shall be considered shelving for purposes of determining compliance with TAS 804.5....
-
1003.2.13.2 Enclosed exit stairways
An enclosed exit stairway, to be considered part of an accessible means of egress, shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate...
-
604.3.2 Overlap
The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible...
-
1017.4 Passing Spaces
Trails with a clear tread width less than 60 inches (1525 mm) shall provide passing spaces complying with 1017.4 at intervals of 1000 feet (300 m) maximum. ...
-
1017.1 General
Trails shall comply with 1017. EXCEPTIONS: 1. ...
-
203.9 Employee Work Areas
Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so that individuals with disabilities...
-
Technical Memorandum TM 2012-07 Press Boxes
Therefore, in the sense that the text implies, the aggregate area of a press box shall include toilet rooms, corridors, and any other areas, elements, and spaces located within the press...