Clear open space. 4. Bottom-hinged door...
Search Results "Clear Floor Area"
-
4.34.6.7* OVENS
-
Sections 35.108(d)(1) and 36.105(d)(1)—Substantially Limits
These rules of construction are based on the requirements of the ADA as amended and the clear mandates of the legislative history....
-
Regulatory Process Matters
and performing area, accessible route required to directly connect both areas....
-
Section 1630.2(j)(1)(ix) Effects of an Impairment Lasting Fewer Than Six Months Can Be Substantially Limiting
The regulations include a clear statement that the definition of an impairment as transitory, that is, “lasting or expected to last for six months or less,” only applies to the “regarded...
-
AJW Architectural Products U126 40 oz. Vertical Liquid Soap Dispenser - Surface Mounted
Viewer: Clear plastic window allows a constant fluid level check. Concealed Mounting Plate: Fabricated of heavy gauge stainless steel....
-
Inclusion Solutions FuelCall™ Gas Station Refueling Assistance
This gas station access system includes a transmitter, clear signage and an intercom for gas stations and convenience stores....
-
ANSI/BHMA: ADA Standard Section 105.2.1
Section 105.2.1 of the ADA Standards cover references to the ANSI/BHMA standards for door durability, strength, and performance.
-
ACCESSIBLE ELEMENT
An ACCESSIBLE ELEMENT can include a room, area, route, feature or device which provides accessibility for persons with disabilities.◼...
-
804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1525...
-
11B-608.1 General
Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom because the shower area provides additional maneuvering space....
-
68.101(c)(5) Existing buildings
In an existing building or facility, where alterations are not planned or the planned alterations will not affect an area containing a primary function, the following minimum requirements...
-
USE ZONE
[DSA-AC] The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 for unrestricted circulation around the play equipment...
-
§ 37.131(a)(1)(i)
The corridor shall include an area with a three-fourths of a mile radius at the ends of each fixed route....
-
11B-608.1 General
Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom because the shower area provides additional maneuvering space. ◼...
-
USE ZONE
[DSA-AC] The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 for unrestricted circulation around the play equipment...
-
11B-217.4.1 Bank requirement
[2010 ADAS] EXCEPTION: TTYs shall not be required at banks of telephones located within 200 feet (61 m) of, and on the same floor as, a bank containing a public TTY. ...
-
M302.4.1 Clearance in Base
The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
M301.4.1 Clearance in Base
The base of diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured...
-
3. Lavatory knee clearance
faucet hardware, the following features need to be provided -- a 29-inch-high clearance under the front edge of the lavatory, the top of the bowl mounted no higher than 34 inches above the floor...
-
604.9.6 Dispensers
The outlet of the dispenser shall be 14 inches (355 mm) minimum and 19 inches (485 mm) maximum above the finish floor....
-
608.7 Thresholds
maximum shall be permitted in transfer type shower compartments in existing facilities where provision of a 1/2 inch (13 mm) high threshold would disturb the structural reinforcement of the floor...
-
502.6 Identification
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. Advisory 502.6 Identification....
-
604.9.6 Dispensers
The outlet of the dispenser shall be 14 inches (355 mm) minimum and 19 inches (485 mm) maximum above the finish floor....
-
11B-411.2.1.7.3 Assignment by security credential
Upon presentation of security credential, the destination floor shall be confirmed by verbal announcement and on the display screen....
