Constructed elements on outdoor recreation access routes, passing spaces, and resting intervals shall comply with 307. Advisory 1016.9 Protruding Objects....
Search Results "Lavatory Clear Floor Space"
-
1016.9 Protruding Objects
-
9.2.2(2)
(2) An accessible route complying with 4.3 shall connect all accessible spaces and elements, including telephones, within the unit, sleeping room, or suite....
-
1007.6.5 Identification
Each door providing access to an area of refuge from an adjacent floor area shall be identified by a sign complying with ICC A117.1, stating: AREA OF REFUGE, and including the International...
-
1003.2.13.5.5 Identification
Each door providing access to an area of refuge from an adjacent floor area shall be identified by a sign complying with ICC A117.1, stating: AREA OF REFUGE, and including the International...
- Mansfield Toilet ADA Commercial Package CP-1313
-
H. After Completing the Survey and Checklist
After Completing the Survey and Checklist Once you have completed the survey and filled out the checklist, you can determine which elements or spaces in a potential shelter facility are...
-
IV. Program Access
alternative methods, if physical barriers are not removed, such as -- Relocating a service to an accessible facility, e.g., moving a public information office from the third floor...
-
11B-407.2.1.1 Height
[2010 ADAS] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of...
-
What types of electrical or communication receptacles are exempt because they serve a “dedicated use”?
Floor electrical receptacles are also exempt. Communication receptacles serving a dedicated use include phone jacks, data ports, network and audio-visual connections....
-
4.21.3 SEAT
The seat shall be mounted 17 in to 19 in (430 mm to 485 mm) from the bathroom floor and shall extend the full depth of the stall. The seat shall be on the wall opposite the controls....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
F247.3.2 Outdoor Recreation Access Routes
Accessible parking spaces or other arrival points serving the trailhead; 2. Starting point of the trail; and 3. ...
-
Accessible Routes
Accessible Routes Accessible routes are continuous, unobstructed paths connecting all accessible elements and spaces of a building or facility on golf courses....
-
Addendum A: List of Terms
Transfer: a transfer that can be completed without the assistance or intervention Level Transfer- A transfer where the transfer surface is at the same height as the wheelchair seat to floor...
-
Sec.36.304(b)(18)
(18) Creating designated accessible parking spaces;...
-
Bus Stop Pads
Comments noted that this reference has been misinterpreted as applying to the vehicle space for buses which are sometimes provided with concrete pads, instead of to adjacent boarding areas...
-
Maintaining Accessibility in Museum Shops
Sales and ticket counters that have been lowered to provide access must be clear and unobstructed for use by people with disabilities....
-
Section 36.202 Activities (Preamble, Section-by-Section Analysis)
Section 36.213 makes clear that the limitations on the ADA's requirements contained in subpart C, such as "necessity'' (Sec.36.301(a)) and "safety'' (Sec.36.301(b)), are applicable to the...
-
17. What should employers do to prevent and correct harassment?
Employers should make clear that they will not tolerate harassment based on disability or on any other basis....
-
11B-707.3 Operable parts
Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch, without activation....
-
4.27.3* Height
Electrical and communications system receptacles on walls shall be mounted no less than 15 in (380 mm) above the floor....
-
407.8.2.2 Obstructed Side Reach
more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches (1170 mm) high maximum and 15 inches (380 mm) high minimum above the floor...
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
