(12) Controls and operating mechanisms in accessible spaces, along accessible routes, or as parts of accessible elements (for example, light switches and dispenser controls) shall comply...
Search Results "Shower Control"
-
4.1.2(12)
-
Flush Controls on Toilets
2010 ADA Standards Flush Controls for accessible toilets are require to be on the open side of the water closet Flush Controls for accessible water closets and toilet compartments...
-
4.27.4 Operation
Controls and operating mechanisms shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
4.27.4 OPERATION
Controls and operating mechanisms shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
§382.57(c)(6)(i) Input controls
(i) Input controls. At least one input control that is tactilely discernible without activation must be provided for each function....
-
§ 382.57(c)(6)(i) Input controls
(i) Input controls. At least one input control that is tactilely discernible without activation must be provided for each function....
-
11B-217.3 Volume controls
All public telephones shall have volume controls complying with Section 11B-704.3....
-
11B-217.3 Volume controls
All public telephones shall have volume controls complying with Section 11B-704.3....
-
11B-217.3 Volume controls
All public telephones shall have volume controls complying with Section 11B-704.3....
-
1134A.6, Item 4
Grab bar reinforcement shall be installed continuous in the walls of showers 32 inches to 38 inches (813 mm to 965 mm) above the floor....
-
1134A.6, Item 4
Grab bar reinforcement shall be installed continuous in the walls of showers 32 inches to 38 inches (813 mm to 965 mm) above the floor....
-
§ 38.37(b)
(b) Controls required by paragraph (a) of this section shall be mounted no higher than 48 inches and no lower than 15 inches above the floor, shall be operable with one hand and shall not...
-
American Specialties Retractable Shower Seat 170
Seat folds up into cabinet. Fabricated of 12 gauge stainless steel, exposed surfaces have a satin finish. Seat has reinforced channels. Wall sub frame furnished, with welded on...
-
11B-610.3.1 Rectangular seats
11B-610.3.1 Rectangular seats. The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum...
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall. The side edge...
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The side...
-
1136A.2 Switch and control heights
1136A.2 Switch and control heights. ...
-
11B-407.4.6.2.3 Illumination
Car control buttons shall be illuminated....
-
11B-407.4.6.2.3 Illumination
Car control buttons shall be illuminated....
-
11B-407.4.6.2.3 Illumination
Car control buttons shall be illuminated....
-
4.1.3(17)(b)
(b)* All telephones required to be accessible and complying with 4.31.2 through 4.31.8 shall be equipped with a volume control....
-
407.4.7.1 Buttons
Car control buttons shall comply with 407.4.7.1....
-
407.4.7.1 Buttons
Car control buttons shall comply with 407.4.7.1....
-
11B-407.4.7.1 Buttons
Car control buttons shall comply with Section 11B-407.4.7.1....
