Section 604.3.2 covers the current ADA Standards for overlapping clearances in the water closet clear floor space.
Search Results "Measuring Technique"
Filters
Commonly Searched Documents
-
Overlap: ADA Standard Section 604.3.2
-
Dispensers: ADA Standard Section 604.7
Section 604.7 covers the current ADA Standards for toilet paper dispensers.
-
11B-809.9.2 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface,...
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
11B-505.4 Height
A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children....
-
Just Manufacturing Automatic Soap Dispenser
Pre-measured dispensing volume (1-1.5ml). Reservoir capacity 900ml - refillable. Sensor detection range adjustable....
-
Seton Parking Signs - Van Accessible with ISA
.063" Engineer Grade reflective aluminum to improve sign visibility at night Extend the life and performance of the sign by upgrading to Seton UltraTuff™ overlaminate Sign measures...
-
Seton Parking Signs - Blue Reserved Parking with ISA
.063" Engineer Grade reflective aluminum to improve sign visibility at night Extend the life and performance of the sign by upgrading to Seton UltraTuff™ overlaminate Sign measures...
-
Inclusion Solutions Blue Parking Stop
Steel installation anchors included Measures 72"L x 4"H x 6"W Weighs 30 lbs....
-
Wheelbase Definition
Wheelbase Definition For the purpose of this analysis, wheelbase is defined as the distance from the center of the primary drive wheel to the center of the caster measured parallel to...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADA Standards] 502.6 Identification....
-
E205.1 General (Section-by-Section Analysis)
Conformance may nonetheless be achieved through a variety of techniques, including providing requisite accessibility through the manner in which the inaccessible file is delivered or publicly...
-
R410.9 Character Spacing
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
-
§ 36.304(d)(3) Reduced scoping for public accommodations
For measures taken to comply with the barrier removal requirements of this section, existing facilities shall comply with the applicable requirements for alterations in § 36.402 and §§ 36.404...
-
703.5.8 Character Spacing
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
-
Can handrails overlap ramp landings?
Along runs and landings, the minimum clear width must be measured between the leading edge of handrails....
-
§ 38.31(b)
(b) Other stepwells and doorways, including doorways in which lifts or ramps are installed, shall have, at all times, at least 2 foot-candles of illumination measured on the step tread,...
-
B. Survey and Review of Polling Place Locations
The survey instrument will include: (1) measurements of each feature in the survey form (e.g., width of parking space, slope of curb ramp); (2) photographs of each element of the polling...
-
Character Specifications
For those with non-rectangular cross sections, the stroke thickness was specified to be 15% maximum of the character height (measured at the top of the cross section) and 10% to 30% (measured...
-
5.8.1.1 Clear Platform Size Recommendation
on wheeled mobility devices shown in the table below.4 Table 5.8.1.1 Wheelbase Measurements on Wheeled Mobility Devices Table !...
-
§382.55(a)
In addition, passengers at foreign airports, including those with disabilities, may be subject to security screening measures required by law of the country in which the airport is located...
-
Issue 5: Can a new chapter be written with a structure for PBS P100 that is performance based and does not disaggregate lighting design by professional disciplines (i.e., integrates subject matter in Chapters 2, 3, 5, and 6)?
Comments by [Participants]: Criteria should be based on measurable psychosocial and psychophysiological metrics (i.e., parameters and values)....
