Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
Search Results "Horizontal Position"
Filters
Commonly Searched Documents
-
11B-903.6 Structural strength
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
Clear Floor Space: ADA Standard Section 605.3
Section 605.3 covers the current ADA Standards for urinal clear floor space.
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
Slope Ratio
Slope Ratio—A ratio of vertical distance to horizontal distance or rise to run....
-
Approach: ADA Standard Section 1002.4.6
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
Design Criteria for the Transfer Station
platform 1 and platform 2 Adjustable between 0”-8” Platform 1 vertical height range Adjustable between 10" and 43” Horizontal...
-
11B-407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
11B-407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
11B-407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
11B-505.10.3 Bottom extension at stairs
At the bottom of a stair flight, handrails shall extend at the slope of the stair flight for a horizontal distance equal to one tread depth beyond the last riser nosing....
-
Back Support: ADA Standard Section 903.4
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
Location: ADA Standard Section 409.3.2
Section 409.3.2 covers the current ADA Standards for the location of private residence elevator doors.
-
11B-605.3 Clear floor space
A clear floor or ground space complying with Section 11B-305 positioned for forward approach shall be provided....
-
36. Must an employer provide a reasonable accommodation for an employee with a disability who violated a conduct rule that is job- related for the position in question and consistent with business necessity?
In this situation, the employer may discipline the employee because he violated a conduct standard addressing tardiness that is job-related for the position in question and consistent with...
-
3.3.2 Experienced Clinicians
“Tables” are equipment used by patients in supine, prone, or side-lying positions. Committee members are considering the same transfer width issue for exam chairs....
-
407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
Bottom-Hinged Door Ovens: ADA Standard Section 804.6.5.2
Bottom-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to one side of the door....
-
11B-409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by Section 11B-409.4.1....
-
Landscape Forms Inc. Presidio Bench Collection
frames Backed or backless Backed seats on curved runs may face inside or outside the circle Optional tubular steel arms welded to seats: one or two per seat Seats bolt securely to horizontal...
