Section 206 covers scoping requirements for accessible routes in the most current ADA Standards.
Search Results "Access Aisle Width"
Commonly Searched Documents
- 
    
  
  Accessible Routes: ADA Standard Section 206
  
 - 
    
  
  503.4 Floor and Ground Surfaces
  
Vehicle pull-up spaces and access aisles serving them shall comply with 302. Access aisles shall be at the same level as the vehicle pull-up space they serve....
 - 
    
  
  Guest Room Doors and Doorways: ADA Standard Section 224.1.2
  
Section 224.1.2 covers scoping requirements in the current ADA Standards for transient lodging guest room doors and doorways.
 - 
    
  
  403.5.3 Passing Spaces
  
An accessible route with a clear width less than 60 inches (1525 mm) shall provide passing spaces at intervals of 200 feet (61 m) maximum....
 - 
    
  
  11B-202.3.1 Prohibited reduction in access
  
[ADA Title II] §35.133 Maintenance of accessible features. c....
 - 
    
  
  11B-703.7 Symbols of accessibility
  
Symbols of accessibility shall comply with Section 11B-703.7. Advisory 11B-703.7 Symbols of accessibility....
 - 
    
  
  Except in an Emergency Evacuation, No Hand-Carrying Passengers
  
Except in an Emergency Evacuation, No Hand-Carrying Passengers Under no circumstances – except for emergency evacuations – should you physically pick up a passenger with a...
 - 
    
  
  403.5.3 Passing Spaces
  
An accessible route with a clear width less than 60 inches (1525 mm) shall provide passing spaces at intervals of 200 feet (61 m) maximum....
 - 
    
  
  11B-403.5.3 Passing spaces
  
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
 - 
    
  
  11B-403.5.3 Passing spaces
  
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
 - 
    
  
  11B-403.5.3 Passing spaces
  
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
 - Figure 410.6 Platform Lift Doors and Gates – Drawing from the U.S. Access Board
 - 
    
  
  403.5.3 Passing Spaces
  
An accessible route with a clear width less than 60 inches (1525 mm) shall provide passing spaces at intervals of 200 feet (61 m) maximum....
 - 
    
  
  Providing Appropriate Information About Accessibility
  
For instance, include minimum width, maximum slope, and condition of the tread surface (is it firm and stable?) on information about trails....
 - 
    
  
  3.1.4.1 Width of Non-RV Campsite Vehicle Parking Areas
  
The width of vehicle parking areas shall be at least 16 feet (4880 mm). Exception 1....
 - 
    
  
  D2. Clear Passage
  
Does at least one door or one side of a double leaf door at the accessible entrance provide at least 32 inches clear passage width when the door is open 90 degrees?...
 - 
    
  
  Wheelchair Accessible Compartments: ADA Standard Section 604.8.1
  
Section 604.8.1 covers the current ADA Standards for wheelchair accessible compartments.
 - 
    
  
  Ambulatory Accessible Compartments: ADA Standard Section 604.8.2
  
Section 604.8.2 covers the current ADA Standards for ambulatory accessible compartments.
 - 
    
  
  Width of Spaces [1012.2]
  
An additional 3 feet of space is needed on the driver’s side so that people using mobility devices can access the utility hookups....
 - 
    
  
  7.3(1)
  
(1) In new construction, accessible check-out aisles shall be provided in conformance with the table below: Total Check-out Aisles of Each Design Minimum Number...
 - 
    
  
  Shelves and Maneuvering Space
  
The space for a "T" turn requires at least 36 inches of width for each segment of the T and it must fit within a 60 inch by 60 inch area....
 - 
    
  
  Section A: Parking
  
access aisle?...
 - 
    
  
  904.1 General
  
Check-out aisles and sales and service counters shall comply with the applicable requirements of 904....
 - 
    
  
  904.1 General
  
Check-out aisles and sales and service counters shall comply with the applicable requirements of 904....