If the operating controls are set back 10 to 24 inches from the front edge of the counter or table are they no higher than 46 inches above the floor?...
Search Results "Sign Clear Floor Space"
-
K5
-
407.3.3.1 Height
The device shall be activated by sensing an obstruction passing through the opening at 5 inches (125 mm) nominal and 29 inches (735 mm) nominal above the finish floor....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
A4.23.9 Medicine Cabinets
Shelves, drawers, and floor-mounted cabinets can be provided within the reach ranges of disabled people....
-
4.15.2* SPOUT HEIGHT
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
4.34.6.5(5)
The finished flooring shall extend under the counter to the wall....
-
A4.23.9 MEDICINE CABINETS
Shelves, drawers, and floor-mounted cabinets can be provided within the reach ranges of disabled people....
-
M303.4.1 Breast Platforms
The height of the breast platform shall be 30 inches (760 mm) high minimum and 42 inches (1065 mm) high maximum above the floor when in use by a patient seated in a wheelchair....
-
Handrail Extensions [§505.10]
Handrail Extensions [§505.10] Handrail extensions at the top and bottom must return to walls, guards, or floors and horizontal portions must comply as protruding objects....
-
11B-813.2.6 Shelf
No fewer than one shelf shall be provided in close proximity to the changing table at 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
11B-407.4.7.1.2 Location
[2010 ADA Standards] EXCEPTION: Where space on an existing car operating panel precludes tactile markings to the left of the controls, markings shall be placed as near to the control...
-
11B-407.4.7.1.2 Location
[2010 ADA Standards] EXCEPTION: Where space on an existing car operating panel precludes tactile markings to the left of the controls, markings shall be placed as near to the control...
-
1009.10 Directional signage
indicating the location of all other means of egress and which of those are accessible means of egress shall be provided at the following: At exits serving a required accessible space...
-
Accessible Entrances
If you have several entrances and only one is accessible, a sign should be posted at the inaccessible entrances directing individuals to the accessible entrance....
-
904.6 Security Glazing
Where assistive listening devices are installed, place signs complying with 703.7.2.4 to identify those facilities which are so equipped....
-
Surcharges
., who is deaf, requests that a sign language interpreter be provided. The department plans to charge M.N. $250 for the course due to interpreter costs....
-
5. Accessible Features
routes; placing portable display racks and potted plants so they do not impede exterior and interior routes; snow removal on exterior routes; replacing damaged or stolen room identification signs...
-
§8.56(j)(2) Objectives of informal resolution/voluntary compliance
The terms of such an informal resolution shall be reduced to a written voluntary compliance agreement, signed by the recipient and the responsible civil rights official, and be made part...
-
C. Mobility Aids and Assistive Devices
[Sec. 382.41(h)] You cannot require passengers with disabilities to sign a waiver of liability for damage to or loss of wheelchairs or other assistive devices....
-
11B-411.2.1.2.1 Keypads
Keypads shall have a star (*) on the lower left button and a minus sign (-) on the lower right button. ...
-
904.6 Security Glazing
Where assistive listening devices are installed, place signs complying with 703.7.2.4 to identify those facilities which are so equipped....
-
Monetary Relief
Within 30 days, the United States shall send to the aggrieved person described in Paragraph 2 of this Agreement a copy of this signed Agreement, along with a Release of Claims, attached...
-
11B-411.2.1.2.1 Keypads
Keypads shall have a star (*) on the lower left button and a minus sign (-) on the lower right button....
-
11B-411.2.1.2.1 Keypads
Keypads shall have a star («) on the lower left button and a minus sign (-) on the lower right button....