requirements Standard 4.33.3, and §§ 221 and 802 of the ADA and ABA Accessibility Guidelines for Buildings and Facilities, as published in the Federal Register on July 23, 2004, to (a) provide wheelchair...
Search Results "Bariatric Wheelchair"
Commonly Searched Documents
-
6.10
-
M303.3.3 Ramped (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry of a wheelchair space, level changes greater than ½ inch high would be required to be ramped and comply with...
-
Line of Sight and Dispersion of Wheelchair Spaces in Assembly Areas
Line of Sight and Dispersion of Wheelchair Spaces in Assembly Areas....
-
5. Edge Protection
The Access Board sought public input with question 30 in the MDE NPRM preamble, on whether there is diagnostic equipment with wheelchair spaces on raised platforms that does not provide...
- Inpro Corporation ENDURANT® Ceiling Hung Partitions
- Inpro Corporation ENDURANT® Floor-to-Ceiling Mounted Partitions
- Inpro Corporation ENDURANT® Floor-Mounted Overhead-Braced Partitions
-
§ 38.53(a)(2)
If doorways connecting adjoining cars in a multi-car train are provided, and if such doorway is connected by an aisle with a minimum clear width of 30 inches to one or more spaces where wheelchair...
-
Secondary ticket market. (Section-by-Section Analysis)
As long as there are vacant wheelchair spaces, requiring venues to provide wheelchair spaces for patrons who acquired inaccessible seats and need wheelchair spaces is an example of a reasonable...
-
Secondary ticket market. (Section-by-Section Analysis)
As long as there are vacant wheelchair spaces, requiring venues to provide wheelchair spaces for patrons who acquired inaccessible seats and need wheelchair spaces is an example of a reasonable...
-
F206.2.8.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
604.8.1.6 Lavatory
In new construction, the wheelchair accessible toilet compartment shall contain an accessible lavatory within it, which must be at least 19 inches wide by 17 inches deep, nominal size, and...
-
T602.3 Approach
One full unobstructed side of each wheelchair space shall adjoin or overlap a passenger access route....
-
Secondary market ticket sales. (Section-by-Section Analysis)
Question 21: Are there particular concerns about the obligation imposed by the proposed rule in which a public entity must provide accessible seating, including a wheelchair space where...
-
221.6 Stadiums, Arenas, and Grandstands
Wheelchair spaces and companion seats shall be dispersed to all levels that include seating served by an accessible route....
-
6.4
6.4 Wheelchair locations and companion seats shall be aligned horizontally so that they are shoulder-to-shoulder with each other and with other seats in the same row....
-
Pre-boarding as an Option
Pre-boarding may also permit you to secure the allotted stowage for your wheelchair or assistive device or it may permit easier access to overhead compartments if you are stowing your assistive...
-
T704.2.2 Operation
A mechanism for requesting stops shall be located at each wheelchair space and priority seat for passengers with disabilities....
-
11B-604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and...
-
M303.3.3.3 Clear Width
The clear width of ramp runs shall be 36 inches (915 mm) minimum.
-
M303.3.3.1 Running Slope
Ramp runs shall have a running slope not steeper than 1:12. EXCEPTION: A running slope not steeper than 1:8 shall be permitted for ramp runs with a maximum height of 2 ½ inches...
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side with a drop off.