[2010 ADAS] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of...
Search Results "Clear Floor Area"
-
11B-407.2.1.1 Height
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-604.7.2 Disposal units
The disposal unit shall be located below the grab bar with the opening of the disposal unit 19 inches minimum (483 mm) above the finish floor....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
d. i.
Provide an 18" distance between the side wall and the toilet centerline of the men's toilet room in the Banquet area. See Standards § 4.16.2....
-
§ 36.308(a)(1)(iii)
(iii) Companion seats shall be equivalent in size, quality, comfort, and amenities to the other seats in the assembly areas. Companion seats may be fixed or movable. * * *...
-
E1-d
Where the slope of the accessible route is greater than 1:20, does this area meet the following requirements for an accessible ramp? Yes No...
-
B9
Does each access aisle connect to an accessible route from the parking area to the shelter's accessible entrance? [ADA Standards § 4.6.2] Yes No...
-
§8.25(c)(1)
., dwelling units and common areas) that limit the accessibility of its programs or activities to individuals with handicaps;...
-
Section 2. Vehicular or pedestrian arrival points
"Vehicular or pedestrian arrival points" means public or resident parking areas, public transportation stops, passenger loading zones, and public streets or sidewalks....
-
802.3.2 Type
Companion seats shall be equivalent in size, quality, comfort, and amenities to the seating in the immediate area. Companion seats shall be permitted to be movable....
-
A9. Accessible Route
Does each access aisle connect to an accessible route from the parking area to the accessible building entrance? [ADA Stds 4.6.2] Yes _____ No _____...
-
§100.201 Premises
Premises means the interior or exterior spaces, parts, components or elements of a building, including individual dwelling units and the public and common use areas of a building....
-
6.4 Connections
Beach access routes shall coincide with or be located in the same general area as the pedestrian access points to the beach. Beach access routes shall extend to the:...
-
III−7.3100 Application (ADAAG §4.1.1(1))
ADAAG applies to all areas in new construction and alterations, except where limited by scoping requirements....
-
68.101(c)(5)(G) Public telephones
(G) If public telephones are required by the lease agreement, or are provided to serve the leased area, at least one public telephone shall comply with TAS 704....
-
§ 37.139(g)
(g) Efforts to coordinate service with other entities subject to the complementary paratransit requirements of this part which have overlapping or contiguous service areas or jurisdictions...
-
III-4.4400 Continuing obligation
ILLUSTRATION 3: An office building that houses places of public accommodation is removing barriers in common areas....
-
The Department’s Rulemaking History
Many other commenters addressed areas of desired regulation or of particular concern....
-
The Department's Rulemaking History
Many other commenters addressed areas of desired regulation or of particular concern....
-
IV. Program Access
., moving a public information office from the third floor to the first floor of a building....
-
11B-604.7 Dispensers and disposal units
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....