Changes in height greater than ½ inch (12.7 mm) shall be accomplished by means of a ramp complying with Section 1114A or by means of a platform constructed to the level of the floor as illustrated...
Search Results "Comply With"
-
1132A.4, Item 3
-
[A] 101.2 Scope
dwellings and multiple single-family dwellings (townhouses) not more than three stories above grade plane in height with a separate means of egress and their accessory structures shall comply...
-
§35.107(a)
A public entity that employs 50 or more persons shall designate at least one employee to coordinate its efforts to comply with and carry out its responsibilities under this part, including...
-
§ 36.504(d) Judicial consideration
In a civil action under §36.503, the court, when considering what amount of civil penalty, if any, is appropriate, shall give consideration to any good faith effort or attempt to comply...
-
4.25.3 Height
Where the distance from the wheelchair to the clothes rod or shelf exceeds 10 in (255 mm) (as in closets without accessible doors) the height and depth to the rod or shelf shall comply with...
-
5.3.6 Entrance
bedrock, perma-frost or other environmental conditions prohibit a level entry or the toilet design (such as a composting toilet) necessitates a raised toilet structure, a sloped entry complying...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
Egress, Means of
An accessible means of egress is one that complies with these guidelines and does not include stairs, steps, or escalators....
-
4.1.7(1)(a) General Rule
Alterations to a qualified historic building or facility shall comply with 4.1.6 Accessible Buildings: Alterations, the applicable technical specifications of 4.2 through 4.35 and the applicable...
-
4.9.4(2)
Handrail extensions shall comply with 4.4....
-
4.13.5 Clear Width
Openings more than 24 in (610 mm) in depth shall comply with 4.2.1 and 4.3.3 (see Fig. 24(e))....
-
4.35.2 Clear Floor Space
Turning space shall not be required in a private dressing room entered through a curtained opening at least 32 in (815 mm) wide if clear floor space complying with section 4.2 renders the...
-
4.6.6 Passenger Loading Zones
If there are curbs between the access aisle and the vehicle pull-up space, then a curb ramp complying with 4.7 shall be provided....
-
Other Requirements [4.11.2]
Platform lifts must comply with all applicable state and local codes and with the ASME A17.1 Safety Code for Elevators and Escalators, Section XX (1990)....
-
Work Areas
Those used only by employees at a work station (janitor closets) or as part of a work area (stockroom shelves) are not required to comply (although work areas must be on an accessible route...
-
4.6.3* Parking Spaces
Parking access aisles shall be part of an accessible route to the building or facility entrance and shall comply with 4.3....
-
4.8.4 LANDINGS
(4) If a doorway is located at a landing, then the area in front of the doorway shall comply with 4.13.6....
-
4.8.1 General
Outdoor rinsing showers shall provide a hand-held shower spray unit complying with ABAAS section 608.6....
-
5.3.6 Entrance
bedrock, perma-frost or other environmental conditions prohibit a level entry or the toilet design (such as a composting toilet) necessitates a raised toilet structure, a sloped entry complying...
-
4) Where the Standard is silent about changes in level
changes in level, such as 604.3 around a water closet or in a toilet compartment: Since there is no mention of the phrase "changes in level are not permitted", are changes in level that comply...
-
4.1.6(1)(b)
emergency exit requirements) requiring major structural changes are planned or installed where none existed previously, then a means of accessible vertical access shall be provided that complies...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
3.4.3 Unrestricted Viewing Opportunities
Where there is a drop-off of more than 30 inches (762 mm) a guard railing or barrier that complies with the height and opening requirements of the International Building Code sections 1013.2...
-
2.4.1 Running Slope (Grade)
The running slope (grade) of ORARs shall comply with all applicable provisions of this section. Table 2.4.1....