Two vehicle spaces shall be permitted to share a common access aisle....
Search Results "RV: Recreational Vehicle"
-
11B-812.7 Access aisle
-
1016.2 Surface
This section requires the surface of outdoor recreation access routes, passing spaces, and resting intervals to be firm and stable....
-
Viewing Areas
Viewing areas in recreation settings must be located along an outdoor recreation access route that connects to the other major features at the site, including the parking area....
-
1016.7.1 Maximum Running Slope and Segment Length
The running slope of any segment of an outdoor recreation access route shall not be steeper than 1:10 (10%). ...
-
1016.7.1 Maximum Running Slope and Segment Length
The running slope of any segment of an outdoor recreation access route shall not be steeper than 1:10 (10%)....
-
1002.4.4.2 Side Entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility...
-
1002.4.5 Ride Entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear.
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear.
-
1016.8 Resting Intervals
Resting intervals shall comply with 1016.8.
-
1016.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered...
-
Companion Seats
Companion Seats Where companion seating is provided on a ride, companion seating adjacent to wheelchair spaces is also required in some cases. A companion seat is required if...
-
Approach
Approach Turning space (60-inch diameter or T-shaped space) for a wheelchair must be provided where the accessible route adjoins the ride, so that riders can access the ride. One...
-
Technical Requirements [1016]
[See subsections ...]
-
Cross Slope [1016.7.2]
Cross slope is the side-to-side slope of the surface of an ORAR. When the surface is constructed of concrete, asphalt, or boards, the cross slope must be no steeper than 1:48 (2...
-
11B-1002.4.7 Companion seats
Where the interior width of the amusement ride is greater than 53 inches (1346 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered...
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height. Where the surface is paved or is elevated above the natural ground,...
-
3.1.3.3 Cross Slope of Driveways
The cross slope of driveways shall not exceed 1:33 (3 percent). Exception. The cross slope of driveways may be no more than 1:20 (5 percent) where needed to ensure proper...
-
3.2.2 ORARs in Camping Units
Connections shall be provided between site furnishings and constructed features in camping units as well as between accessible camping units, parking areas, and accessible common use...
-
3.1.3.2 Running Slope (Grade) of Driveways
The running slope of driveways shall be no more than 1:12 (8.33 percent) for no more than 50 feet (15 m). Exception 1. A running slope of up to 1:10 (10 percent) for driveways is...
-
1016.8.1 Length
This section requires resting intervals to be 60 inches long minimum.
-
2.5.2 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
2.5 Resting Intervals
Resting intervals shall comply with 2.5.
-
2.6.1 Size
The passing space shall be either: