(c) A grab bar at least 24 inches (610 mm) long should be mounted behind the water closet, and a horizontal grab bar at least 40 inches (1015 mm) long should be mounted on at least one side...
Search Results "Horizontal Projection"
-
(1)(c)
-
PLATFORM
entertainment; the head table for special guests; the raised area for lecturers and speakers; boxing and wrestling rings; theater-in-the-round stages; and similar purposes wherein, other than horizontal...
-
RECOMMENDATIONS
FEATURE AASHTO DESIGN VALUE (FOR BICYCLISTS) POTENTIAL DESIGN USER PERFORMANCE VALUE (85TH PERCENTILE) Sweep width 1.2 m Inline skaters 1.5 m Horizontal...
-
Clearances Around Gripping Surfaces
ensure sufficient space for a person to grasp the grab bar: 1½ inches absolute clearance between grab bars and the adjacent wall surfaces; 1½ inches minimum clearance between grab bars and projecting...
-
11B-903.4 Back support
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. [2010 ADAS] 903.4 Back Support. ...
-
1007.3 Stairways
between handrails and shall either incorporate an area of refuge within an enlarged floor-level landing or shall be accessed from either an area of refuge complying with Section 1007.6 or a horizontal...
-
Accessibility Guidebook for Outdoor Recreation and Trails
Janet Zeller, National Accessibility Program Manager Ruth Doyle, Cibola National Forest Recreation, Engineering, Archaeology, Lands, and Minerals Staff Officer Kathleen Snodgrass, Project...
-
Accessibility - Flatness and Lippage
Project specifications should make clear which trade is responsible for the required alterations if the subfloor is found not to be in compliance with the flatness requirements....
-
I. BACKGROUND
The project design phase for the Middletown Road Station renovations was completed by an NYCTA design team in 2007. Pls.’ Responses ¶ 29....
-
PEAT TalentWorks: Accessible Technology vs. Assistive Technology
Corinne Weible - Project Manager, PEAT Learn about differences between accessible technologies and assistive technologies....
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. ...
-
§ 38.113(d)(1) Requirements
Cars which provide level-boarding in stations with high platforms shall be coordinated with the boarding platform or mini-high platform design such that the horizontal gap between a car...
-
1015.2 Where required
equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically to the floor or grade below at any point within 36 inches (914 mm) horizontally...
-
Summary
This project developed drawings for gates that meet the accessibility requirements for wheelchairs, horses, or both, but restrict motorized vehicle access....
-
Can handrail extensions wrap or turn?
In alterations where the required extension would project into circulation paths and pose a hazard, they can turn, wrap, or be shortened as necessary....
-
Re: Steven Jones
Think about accessibility early in a project process. The sooner the better. Talk to someone if you are not sure about compliant solution....
-
Bid Estimating Software: Work Smarter, Not Harder
From construction to project management, the right estimating tools can seriously boost productivity and confidence in your bids....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Pole-supported pedestrian traffic-control buttons shall be identified with color coding consisting of a textured horizontal yellow band 2 inches (51 mm) in width encircling the pole, and...
-
4.28.3(7)
(7) In general, no place in any room or space required to have a visual signal appliance shall be more than 50 ft (15 m) from the signal (in the horizontal plane)....
-
4.9.4(2)
At the bottom, the handrail shall continue to slope for a distance of the width of one tread from the bottom riser; the remainder of the extension shall be horizontal (see Fig. 19(c) and...
-
§ 38.53(d)(1) Requirements
Where new vehicles will operate in new stations, the design of vehicles shall be coordinated with the boarding platform design such that the horizontal gap between each vehicle door at rest...
-
§ 38.173(b)
(b) Where the vehicle covered by paragraph (a) will operate in an accessible station, the design of vehicles shall be coordinated with the boarding platform design such that the horizontal...
-
11B-216.4.1 Exit doors
An exit passageway is a horizontal exit component that is separated from the interior spaces of the building by fire-resistance-rated construction and that leads to the exit discharge or...
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Pole-supported pedestrian traffic-control buttons shall be identified with color coding consisting of a textured horizontal yellow band 2 inches (51 mm) in width encircling the pole, and...