A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2....
Search Results "Grab Bar Clearance"
Commonly Searched Documents
- 
    
  
  606.2 Clear Floor Space
  
 - 
    
  
  Range or Cooktop: ADA Standard Section 804.6.4
  
Where a forward approach is provided, the clear floor or ground space shall provide knee and toe clearance complying with 306....
 - 
    
  
  11B-804.6.4 Range or cooktop
  
Where a forward approach is provided, the clear floor or ground space shall provide knee and toe clearance complying with Section 11B-306....
 - 
    
  
  4.15.5 Clearances.
  
[See subsections ...]
 - 
    
  
  4.15.5 CLEARANCES
  
[See subsections ...]
 - 
    
  
  Door Maneuvering Clearance
  
Section 404.2.4 addresses maneuvering clearances at manual doors, doorways, and gates....
 - 
    
  
  11B-606.2 Clear floor space
  
A parallel approach complying with Section 11B-305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2. ...
 - 
    
  
  11B-606.2 Clear floor space
  
A parallel approach complying with Section 11B-305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2. Reserved...
 - 
    
  
  11B-606.2 Clear floor space
  
A parallel approach complying with Section 11B-305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2. Reserved...
 - 
    
  
  2.3 Restrooms
  
Are there grab bars beside and behind the toilet?...
 - 
    
  
  Vertical Clearance
  
A minimum vertical clearance of 114 inches is required at passenger loading zones and along at least one vehicular route connecting accessible loading zones with site entrance and exits....
 - 
    
  
  Is additional latch side clearance required on the push side of doors with a forward approach when either a latch or closer (but not both) is provided?
  
No, latch clearance 12” minimum is required for forward approaches on the push-side of doors equipped with both a closer and a latch....
 - 
    
  
  11B-604.3.2 Overlap
  
The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible...
 - Figure 404.2.4.1(e) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Pull Side – Drawing from the U.S. Access Board
 - Figure 404.2.4.1(f) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side – Drawing from the U.S. Access Board
 - Figure 404.2.4.1(h) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side – Drawing from the U.S. Access Board
 - Figure 404.2.4.1(j) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side – Drawing from the U.S. Access Board
 - Figure 404.2.4.1(d) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Pull Side – Drawing from the U.S. Access Board
 - Figure 404.2.4.1(i) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side with Closer – Drawing from the U.S. Access Board
 - 
    
  
  Conclusion
  
During this second phase of the independent wheelchair transfer study, platform transfers with and without grab-bars and a backrest and two-step transfers were evaluated....
 - 
    
  
  A4.34.6.1 CLEARANCE
  
The minimum clearances provide satisfactory maneuvering spaces for wheelchairs only if cabinets are removed at the sink....
 - 
    
  
  M303.2.4 Knee and Toe Clearance
  
Wheelchair spaces shall include knee and toe clearance complying with M303.2.4....
 - Figure 404.2.4.1(g) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
 - 
    
  
  Minimum Required Depth: ADA Standard Section 306.2.3
  
Section 306.2.3 covers the current ADA Standards for the minimum required depth for toe clearance.