buildings not over two stories in height where all dwelling units and contiguous attic and crawl spaces are separated from each other and public or common areas by at least 1-hour fire partitions...
Search Results "Counter Partition"
Commonly Searched Documents
-
907.2.9 Group R-2
-
Calculation of Percentages
For example, for the location of wheelchair accessible water closets (16” – 18” centerline from side walls or partitions), specifying to the midpoint of the range (17”) will accommodate...
- Caroma® USA Invisi Series II Cube Wall Hung Water Closet
- Caroma® USA Invisi Series II Walvit Wall Hung Elongated Water Closet
-
General: ADA Standard Section 205.1
Section 205.1 of the ADA Standards covers information on scoping requirements for operable parts in the most current ADA Standards.
-
Gift Shops
Hand credit cards back to your guest, rather than leaving them on a counter....
- FBD Partnership Four Flavors Frozen Beverage Dispenser
- Just Manufacturing Ledgemount Non-Swivel Gooseneck Concealed Mixing Faucet
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
2. a. iii. Costs
Doors at entrances, Accessible door hardware, Adequate wheelchair maneuvering space, Accessible fixed seating and tables, and Accessible sales and service counters...
-
4.34.6.10* KITCHEN STORAGE
shall comply with 4.25 and shall have the following features: (1) Maximum height shall be 48 in (1220 mm) for at least one shelf of all cabinets and storage shelves mounted above work counters...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
Dining Surface and Work Surface
Some commenters considered the term too limiting and questioned whether it would apply, as they felt it should, to surfaces used forpurposes not necessarily considered "work," such as counters...
- Doug Mockett & Company SDH1 Sliding Door Hardware
-
1134A.7, Item 1
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a grab bar wall or partition....
- FBD Partnership Three Flavors Frozen Beverage Dispenser
- FBD Partnership Two Flavors Frozen Beverage Dispenser
-
226 Dining Surfaces and Work Surfaces
surfaces covered do not include those surfaces used by employees, since elements of work stations are not required to comply with these guidelines (226.1) exempt sales and service counters...
-
D. Reach Range
[ADA Stds. 5.5] Yes __ No __ N/A __ Comments: ________________________________________ ...operational controls higher than 46" if they are set back 10"-24" from the edge of the counter...
-
Single-User Toilet Rooms: No Side Transfer Space
Lavatory placement is limited by the rear gab bar, which should not overlap counter surfaces....
- Just Manufacturing Classroom Concealed Ledgemount Teardrop Handles Restricted Swing Faucet
- Just Manufacturing Concealed Classroom Faucet with High Rise Spout
- Neo-Metro Commercial Wall Mounted Pat Basin Featuring Dyson® Airblade™ Tap/Hand Dryer
