A: Assistive listening systems and devices receive and amplify sound and are used for communicating in a group setting with individuals who are hard of hearing. At...
Search Results "ALS Signage"
-
15. Q: When would an officer use an assistive listening device as a communication aid?
-
§1193.43(h) Non-interference with hearing technologies
(h) Non-interference with hearing technologies. Reduce interference to hearing technologies (including hearing aids, cochlear implants, and assistive listening devices) to the lowest...
-
11B-706.2 Receiver jacks
11B-706.2 Receiver jacks. Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack.
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack.
-
219.2 Required Systems
In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided. EXCEPTION: Other than in courtrooms,...
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack.
-
706.2 Receiver Jacks
706.2 Receiver Jacks. Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack.
-
219.2 Required Systems
219.2 Required Systems. In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided. EXCEPTION: Other...
-
Re: 216.6 Entrances
with 703.5 that indicate the location of the nearest entrance complying with 404 shall be provided at entrances that do not comply with 404 35.163(b) "A public entity shall provide signage...
-
Re: 216.6 Entrances
with 703.5 that indicate the location of the nearest entrance complying with 404 shall be provided at entrances that do not comply with 404. 35.163(b) "A public entity shall provide signage...
-
706.1 General
The Access Board has published technical assistance on assistive listening devices and systems (http://www.access-board.gov/adaag/about/bulletins/als-index.htm)....
- Access Board: Tactile Sign Visual Requirements
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6. Exception: Signs shall not be required to comply with Sections 11B-810.6.1 and 11B-810.6.2 where audible signs are remotely...
-
Rail Station Signs: ADA Standard Section 810.6
Rail station signs shall comply with 810.6. EXCEPTION. Signs shall not be required to comply with 810.6.1 and 810.6.2 where audible signs are remotely transmitted to hand-held...
-
International Symbol of Accessibility: ADA Standard Section 703.7.2.1
The International Symbol of Accessibility shall comply with Figure 703.7.2.1.
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6. Exception: Signs shall not be required to comply with Sections 11B-810.6.1 and 11B-810.6.2 where audible signs are remotely...
-
11B-502.8 Additional signs
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and...
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not...
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not...
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high.
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2).
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves. Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected...
-
11B-812.8.4 Ambulatory
Ambulatory EVCS shall not be required to be identified by an ISA.
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2).