Glazing: Clear Low-E tempered 1 3/8″ insulated is the standard. A minimum of 1/4″ single pane glass to a maximum 1 1/2″ hurricane rated insulated glass may be used....
Search Results "Centered Clear Floor Space"
- Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
-
4.1.1(5)
(5) (a) If parking spaces are provided for employees or visitors, or both, then accessible spaces, complying with 4.6, shall be provided in each such parking area in conformance with the...
- Murdock Manufacturing Waterless Toilet Riser with Seat and Cover
-
Problem Three
Problem Three: Accessible parking spaces or access aisles are on a sloped surface. Suggestion: Find a parking area that is close to the accessible entrance and more level....
-
1.14 Riser
1.14 "Riser" shall mean and refer to an elevated tier (usually six to eighteen inches) in an auditorium on which seats are affixed to the auditorium floor....
-
4. Toilet seat height
Toilet seat height: The toilet seat needs to be from 17 to 19 inches above the floor to permit transfers to and from wheelchairs....
-
J3
Is the top of the spout no higher than 36 inches above the floor and at the front of the fountain or water cooler? [ADA Standards § 4.15.2] Yes No...
-
I. Toilet Seat
Is the toilet seat at each accessible toilet between 17"-19" above the floor? [ADA Stds. 4.16.3] Yes __ No __ N/A __ Comments: ___________________________________________...
-
e-vii
Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Standards § 4.10.13] Yes No...
-
4.15.2* Spout Height
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
4.19.6* MIRRORS
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) from the floor (see Fig. 31)....
-
1134A.5, Item 2
A bathtub installed without surrounding walls shall provide reinforced areas for the installation of floor-mounted grab bars....
-
1134A.5, Item 2
A bathtub installed without surrounding walls shall provide reinforced areas for the installation of floor-mounted grab bars....
-
1009.6 Areas of refuge
Every required area of refuge shall be accessible from the space it serves by an accessible means of egress....
-
Passenger Loading Zones: ADA Standard Section 209.2.1
Section 209.2.1 covers scoping requirements in the current ADA Standards for passenger loading zones.
-
1009.6 Areas of refuge
Every required area of refuge shall be accessible from the space it serves by an accessible means of egress....
-
Section 4.1.2, Accessible Sites and Exterior Facilities: New Construction (Preamble, Section-by-Section Analysis)
Interior elements and spaces are covered by § 4.1.3....
-
Parking Signage
Under the first exception, accessible spaces in lots with four or fewer spaces are not required to be identified as accessible (i.e., reserved solely for use by people with disabilities)...
-
11B-502.6.4.2
11B-502.6.4.2 The parking space shall be outlined in blue or painted blue and shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 a minimum...
-
11B-502.6.4.2
The parking space shall be outlined in blue or painted blue and shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 a minimum 36 inches wide...
-
502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for angled van parking spaces which shall have access aisles located on the passenger side of the...
-
What materials may satisfy ADAAG requirements?
If there is a choice between flooring materials otherwise suitable for a particular application, we recommend choosing the material with the higher coefficient of friction, particularly...
- Mainstream Center for Independent Living - Little Rock, AR
-
Technical Requirements [1018 and 1018.1, Exception 3]
The technical requirements for beach access routes include specific provisions for connections, the surface, clear width, obstacles, openings, running slope, cross slope, resting intervals...