The other codes listed in Sections 101.4.1 through 101.4.7 and referenced elsewhere in this code shall be considered part of the requirements of this code to the prescribed extent of each...
Search Results "Cross Section"
-
101.4 Referenced codes
-
11B-224.8.1 More than 25-bed sleeping rooms
In sleeping rooms with more than 25 beds, a minimum of 5 percent of the beds shall have clear floor space complying with Section 11B-806.2.3....
-
11B-504.4 Tread surface
Stair treads shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
11B-234.4.1 Load and unload areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with Section 11B-1002.3....
-
11B-1008.3.1 Transfer platforms
Transfer platforms shall comply with Section 11B-1008.3.1....
-
11B-232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with Section 11B-807.2.3....
-
11B-903.2 Clear floor or ground space
Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
- LIFTT - Billings, MT
- New York Association on Independent Living (NYAIL) - Albany, NY
- Metropolitan Center for Independent Living (MCIL) - Minneapolis, MN
-
1.9.1 Division of the State Architect - Access Compliance.
See California Government Code Section 4451(e). ◼ In addition, to incorporate standards at least as restrictive as those required by the federal government for barrier-free design under...
-
BACKGROUND
Section 36....
-
B. The ADA Standards for Accessible Design
A at 860-61 (Section 36.406(b))....
-
Application Based on Building or Facility Use: ADA Standard Section 201.2
Section 201.2 covers the application of the most current requirements based on the building or facility use.
-
11B-604.8.1.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404 except that if the approach is from the push side of the compartment door, clearance between the door...
-
11B-604.8.1.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404 except that if the approach is from the push side of the compartment door, clearance between the door...
-
Guest Rooms with Communication Features
The revisions at section 224.4 of the 2010 Standards effect no substantive change from the 1991 Standards with respect to the number of guest rooms required to provide communication features...
-
New and Altered Permanently Installed Amusement Rides
Section 234 of the 2010 Standards sets out scoping requirements and section 1002 sets out the technical requirements for the accessibility of permanently installed amusement rides....
-
F203.2 Existing Elements
Elements in compliance with an earlier standard issued pursuant to the Architectural Barriers Act or Section 504 of the Rehabilitation Act of 1973, as amended, shall not be required to comply...
-
705 Detectable Warnings
Section 705 provides the technical specifications for detectable warnings, a distinctively textured surface of truncated domes identifiable by cane and underfoot....
-
11B-221.2.1.3 Other boxes
In boxes other than those required to comply with Section 11B-221.2.1.2, the total number of wheelchair spaces required shall be determined in accordance with Table 11B-221.2.1.1....
-
Recitals
with mobility disabilities; or (iii) acted in any manner that would support a finding that the City is liable for damages under Title II of the Americans with Disabilities Act, or under Section...
-
809.3.1.2 Residential Dwelling Unit Smoke Alarms
809.3.1.2 Residential Dwelling Unit Smoke Alarms This section requires residential dwelling unit smoke alarms to provide combination smoke alarms and visible notification appliances....
-
6. Transfer Surface Height
Transfer Surface Height 6.3 Diagnostic Imaging Equipment Refer to the Rationale found in Section 5.3 for M301.2.1 and to Section 4.3....