[ADA Standards § 4.13.6, Fig. 25] Yes No If No, leave the door propped open or find another accessible entrance....
Search Results "ASCII: American Standard Code for Information Interexchange"
-
D4
-
4.17.4 Toe Clearances
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
4.17.4 TOE CLEARANCES
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
Stability or Stable Surface
stable surface is one that remains unchanged by contaminants or applied force, so that when the contaminant or force is removed, the surface returns to its original condition (2010 ADA Standards...
-
d. Unobstructed Transfer
This data helped inform the recommendation for the exception since the 3-inch criteria is less than that used in the research and should assure effective transfers for most.”...
-
Section 37.165 Lift and Securement Use
The entity is required, on a vehicle meeting part 38 standards, to use the securement system to secure wheelchairs as provided in that part....
-
Section 37.165 Lift and Securement Use
The entity is required, on a vehicle meeting part 38 standards, to use the securement system to secure wheelchairs as provided in that part....
- R&D Workshop Trim-A-Slab Installation Video
- Federal Elevator 360 Passenger Elevator
-
502.2.1 User Control of Accessibility Features (Section-by-Section Analysis)
This provision would be new to the 508 Standards and 255 Guidelines, though it draws on the prohibition in § 1194.21(b) of the existing 508 Standards against disrupting or disabling accessibility...
-
Accessible Routes in Dwelling Units with Mobility Features
The 2010 Standards at sections 233.3.1.1, 809.1, 809.2, 809.2.1, and 809.4 will require all spaces and elements within dwelling units with mobility features to be on an accessible route....
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
The change harmonizes this provision with the international standards. IEC 60601-2-52 provides requirements for stretchers and includes a lift clearance at the 39 inch width....
-
Facility
Facilities must comply with all 2010 ADA Standards for Accessible Design for new construction and remodeling projects....
-
Stadium-style theaters. (Section-by-Section Analysis)
The 1991 Standards require that wheelchair seating "provide people with physical disabilities a choice of admissions prices and lines of sight comparable to those for members of the general...
-
G.12 - May an agency exempt an acquisition from the requirements of Section 508 if such procurement is undertaken to comply with the Government Paperwork Elimination Act (GPEA)?
., comply with the Access Board's standards where applicable....
-
Door Hardware
The ANSI standard also recognizes this point....
-
12101(b)(4)
L. 110-325, § 2, Sept. 25, 2008, 122 Stat. 3553, provided that: (4) to reject the standards enunciated by the Supreme Court in Toyota Motor Manufacturing, Kentucky, Inc. v....
-
407.12.3 Forward Reach (Section-by-Section Analysis)
As noted previously, the existing 508 Standards do not provide specifications for forward reaches....
-
C102.7.2 ITU-T Recommendation E.161
Advisory C102.7 International Telecommunications Union Telecommunications Standardization Sector (ITU-T). ...
-
C102.5 IETF
Copies of the referenced standard may be obtained from the Internet Engineering Task Force (http://www.ietf.org)....
-
210 Stairways
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1.3(4) Interior...
-
3.3.15.3 Side (lateral) reach – over an obstruction depth of 610 mm
For heights that approximated the U.S. standard of 1170 mm (46 in.), only 31% of the manual wheelchair users, 24% of the power wheelchair users and 13% of the scooter users could reach 610...
-
Specific Spaces and Occupancies
The ADA Standards include scoping requirements specific to certain types of spaces and facilities that apply based on the intended use and design....
-
§ 35.151(k)(2) Alterations to detention and correctional facilities.
Alterations to jails, prisons, and other detention and correctional facilities shall comply with the 2010 Standards except that public entities shall provide accessible mobility features...