36" W x 54" D (91 x 137cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing....
Search Results "9-1-1 Service"
-
Bobrick Two-Wall Tub/Shower Toilet Compartment Grab Bar Peened B-68137.99
-
Bobrick Two-Wall Toilet Compartment Grab Bar Peened B-6897.99
42" W x 54" D (107 x 137cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing....
-
Bobrick Two-Wall Tub/Shower Toilet Compartment Grab Bar B-5837
36" W x 54" D (91 x 137cm), 1-1/4" (32mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing....
-
iii. Need for Department action
See Memorandum on Electronic Commerce, 33 WCPD 1006, 1006-1010 (July 1, 1997), available at http://www.gpo.gov/fdsys/pkg/WCPD-1997-07-07/html/WCPD-1997-07-07-Pg1006-2.htm (last visited June...
-
Clear Floor Space: ADA Standard Section 606.2
Section 606.2 covers the current ADA Standards for clear floor space at lavatories and sinks.
-
Press Boxes: ADA Standard Section 206.2.7
Section 206.2.7 covers scoping requirements in the most current ADA Standards for accessible routes to press boxes.
-
11B-210.1 General
Exceptions: 1. In detention and correctional facilities, stairs that are not located in public use areas shall not be required to comply with Section 11B-504. 2....
-
11B-234.3 Minimum number
Advisory 11B-234.3 Minimum number Exceptions 1 through 3....
-
1028.5 Access to a public way
At facilities regulated by Chapter 11B, an accessible area within the space required by Item 1 shall be provided for a minimum of 2 percent of the facility occupants served by the safe dispersal...
-
1009.2 Continuity and components
accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components: Accessible routes complying with Chapter 11A, Section 1110A.1...
-
11B-234.3 Minimum number
Advisory 11B-234.3 Minimum number Exceptions 1 through 3....
-
11B-210.1 General
Exceptions: 1. In detention and correctional facilities, stairs that are not located in public use areas shall not be required to comply with Section 11B-504. 2....
-
1009.2 Continuity and components
accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components: Accessible routes complying with Chapter 11A, Section 1110A.1...
-
Bobrick Clothes Hook B-233
Hook is 1 1⁄4" x 1 1⁄4" (30 x 30mm) and projects 1 1⁄8" (30mm) from wall. Unit is 2 1⁄4" (55mm) high....
-
224.4 Guest Rooms with Communication Features
2 to 25 2 26 to 50 4 51 to 75 7 76 to 100 9...
-
MONETARY RELIEF
Within forty-five (45) days of the United States notifying PPD of its determination and PPD receiving both a signed release (Attachment C) and a completed and signed W-9 from an aggrieved...
-
4.1 Transition Plan Standards.
Transition plans were required for airport facilities owned by airports by November 1, 1996, as part of the amendment to 49 CFR § 27.71(g))....
-
11B-1009.2.1 Pool lift location
Exceptions: 1. Where the entire pool depth is less than 36 inches (914 mm) or greater than 48 inches (1219 mm), compliance with Section 11B-1009.2.1 shall not be required. 2. ...
-
1011.3 Operable Parts
EXCEPTIONS: 1. Fire rings, grills, fireplaces, wood stoves, water hydrants, and water utility hookups shall comply with 309.4 to the extent practicable. 2. ...
-
1007.3.2 Golf Club Reach Range Area
shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum having a running slope not steeper than 1:...
-
B. What does an accessibility survey entail?
The forms and instructions contained in Appendices 1 and 2 will guide surveyors through this process, which generally entails: identifying the features at the facility that need...
-
§382.3 Conforming alternate version
At least one of the following applies to a conforming alternative version: (1) The conforming version can be reached from the non-conforming page via an accessibility-supported mechanism...
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1016.4.1 Size
The passing space shall be either: 1. A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or 2....
