Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with 803.5....
Search Results "Shall"
-
222.2 Coat Hooks and Shelves
-
1134A.3 Powder rooms
All powder rooms shall be designed to comply with Section 1134A.2, Option 2, Items 8 through 12. ...
-
10.2.1(2)
(2) Where provided, new or replaced bus shelters shall be installed or positioned so as to permit a wheelchair or mobility aid user to enter from the public way and to reach a location,...
-
10.3.2(5)
(5) New direct connections to commercial, retail, or residential facilities shall, to the maximum extent feasible, have an accessible route complying with 4.3 from the point of connection...
-
R204.1 General
Pedestrian access routes shall be provided in accordance with R204 and shall comply with R302. Advisory R204.1 General....
-
4.1.3(21)
are provided for use by the general public, patients, customers or employees, 5 percent, but never less than one, of dressing rooms for each type of use in each cluster of dressing rooms shall...
-
7.2(2)(iii)
(iii) equivalent facilitation shall be provided (e.g., at a hotel registration counter, equivalent facilitation might consist of: (1) provision of a folding shelf attached to the main counter...
-
3.4.8 Viewing Areas Accessed by Vehicular Ways
Where a viewing area is accessed by a vehicular way and parking spaces are provided adjacent to the viewing area, the accessible parking spaces shall be connected to the viewing areas by...
-
5.2 FOOD SERVICE LINES
Food service lines shall have a minimum clear width of 36 in (915 mm), with a preferred clear width of 42 in (1065 mm) where passage of stopped wheelchairs by pedestrians is desired....
-
F244.5.2 Routes to and Within Common Use and Public Use Areas
Common use and public use areas serving camping units with mobility features shall provide outdoor recreation access routes in accordance with F244.5.2....
-
604.5 Grab Bars
Grab bars for water closets shall comply with 609. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall....
-
§ 35.108(d)(1)(viii)
(viii) The determination of whether an impairment substantially limits a major life activity shall be made without regard to the ameliorative effects of mitigating measures....
-
68.101(b) Lease Evaluation Form
(b) The agency shall, prior to advertisement for bid, submit to the department for a determination a completed Lease Evaluation Form obtained from the department....
-
11B-804.6.6 Refrigerator/freezer
Combination refrigerators and freezers shall have at least 50 percent of the freezer space 54 inches (1372 mm) maximum above the finish floor or ground....
-
§ 38.23(d)(7) Seat belt and shoulder harness
For each wheelchair or mobility aid securement device provided, a passenger seat belt and shoulder harness, complying with all applicable provisions of part 571 of this title, shall also...
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not displaying...
-
§ 37.127(e)
(e) A public entity shall make the service to a visitor required by this section available for any combination of 21 days during any 365-day period beginning with the visitor's first use...
-
§ 37.127(d)
The entity shall provide paratransit service to individuals with disabilities who qualify as visitors under paragraph (b) of this section....
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
§ 38.31(c)
(c) The vehicle doorways, including doorways in which lifts or ramps are installed, shall have outside light(s) which, when the door is open, provide at least 1 foot-candle of illumination...
-
§ 38.125(c)(1) Design load
Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
§ 38.95(c)(1) Design load
Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with...
-
11B-213.3.2 Water closets
Where water closets are provided, at least five percent but no fewer than one shall comply with Section 11B-604. [S.H. 11B-213.3.2] [2010 ADAS] 213.3.2 Water Closets....