Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall...
Search Results "Operable Part (Control)"
2010 ADA Definition
Operable Part (Control): A component of an element used to insert or withdraw objects, or to activate, deactivate, or adjust the element.
Filters
Commonly Searched Documents
-
11B-604 Water closets and toilet compartments
-
Scenario 2 – Suspected Disability & Involvement of Knowledgeable People
His parents insist that he gets a good night sleep but note that their pediatrician told them Robert might have narcolepsy, a chronic brain disorder that involves poor control of sleep and...
-
I. GENERAL NONDISCRIMINATION REQUIREMENTS
criteria or methods of administration that have the effect of discriminating on the basis of disability, or perpetuate the discrimination of others who are subject to common administrative control...
-
Maintenance
Performing erosion control and drainage work, such as replacing or installing drainage dips or culverts and realigning sections of trail to reduce erosion or avoid boggy areas....
-
ADA Tolerances - Additional Resources
., David Kent Ballast, FAIA, CSI, John Wiley & Sons Hawaii State Department of Transportation, Section 01-4117, Barrier-Free Quality Control, guide specification, Hawaii DOT Specification...
-
III-7.5165 Signage
and other signs providing temporary information (such as current occupant's name) do not have to comply with any ADAAG requirements. 4) New symbols of accessibility identifying volume control...
-
Paragraph (d) (Advisory Guidance)
Control of the microphone is needed for situations such as pay-phone usage, where ambient noise picked up by the mouthpiece often garbles the signal....
-
3) Signs
* Has requirements not only for the standard international symbol of accessibility, but also for symbols of accessibility identifying volume control telephones, text telephones, and...
-
1133B.2.3.2
When an automatic door operator is utilized to operate a pair of doors, at least one of the doors shall provide a clear, unobstructed opening width of 32 inches (813 mm) with the door positioned...
-
TITLE III COVERAGE
enjoyment of the goods, services, facilities, privileges, advantages, and accommodations of any place of public accommodation by any private entity that owns, leases (or leases to), or operates...
-
E102.6 ISO (Section-by-Section Analysis)
E102.6 ISO (Section-by-Section Analysis) ISO 14289-1 (2012), Document management applications — Electronic document file format enhancement for accessibility — Part 1: Use of ISO 32000...
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
4.1 Transition Plan Standards.
Transition plans were required for airport facilities owned by airports by November 1, 1996, as part of the amendment to 49 CFR § 27.71(g))....
-
Audiovisual Presentations
The speaker can describe visuals as part of her lecture....
-
F233 Residential Facilities
Regarding GSA facilities (those covered in this pocket guide), guidance has been provided by GSA in its SubChapter C—Real Property Regulations at Part 102-76—Design and Construction....
-
§ 382.43 Treatment of mobility aids and assistive devices
(b) With respect to domestic transportation, the baggage liability limits of 14 CFR part 254 do not apply to liability for loss, damage, or delay concerning wheelchairs or other assistive...
-
B. What does an accessibility survey entail?
The purpose of an accessibility survey is to determine whether or not a facility, or the component parts of a facility, have barriers to access by people with a variety of disabilities....
-
Section 1630.16(a) Religious Entities
Section 1630.16(a) Religious Entities Religious organizations are not exempt from title I of the ADA or this part....
-
406.7 Islands
Each curb ramp shall have a level area 48 inches (1220 mm) long minimum by 36 inches (915 mm) wide minimum at the top of the curb ramp in the part of the island intersected by the crossings...
-
SEAT HEIGHT MEASUREMENT DETAIL
Lower parts of the transfer surface (such as the front edge) would have an even lower height. For reference, ¾ inches is a typical bolster height used on many examination tables....
-
2. Library and RecPark Facilities
The following section is divided into two parts....
-
215.5 Residential Dwelling Units, F215.5 Residential Dwelling Units
Amendatory Language For the reasons stated in the preamble, we amend 36 CFR part 1191 as follows: In 215.5, revising the section to read as follows: 215.5 Residential Dwelling Units...
-
F233.3.1.2 Facilities Containing Emergency Transportable Housing Units
Amendatory Language For the reasons stated in the preamble, we amend 36 CFR part 1191 as follows: In F233.3.1.2, revising the section to read as follows: F233.3.1.2 Facilities Containing...
-
502.4 Platform Accessibility Features
Platforms and platform software shall conform to the requirements in ANSI/HFES 200.2, Human Factors Engineering of Software User Interfaces — Part 2: Accessibility (2008) (incorporated by...