At least two accessible means of entry shall be provided for swimming pools....
Search Results "Shall"
-
242.2 Swimming Pools
-
3.2 Projects with Adjusted Construction Costs Above the Valuation Threshold
the enforcing agency determines the cost of compliance with Section 11B-202.4 is an unreasonable hardship, as defined in Chapter 2, Section 202, full compliance with Section 11B-202.4 shall...
-
68.31. Variance Procedures
A separate Variance Application form shall be submitted for each TAS standard within a single building or facility....
-
REMEDIAL ACTIONS
THE CREDIT UNION shall not discriminate against any individual on the basis of disability in the full and equal enjoyment of any of its goods, services, facilities, privileges, advantages...
-
11B-1003.3.1 Boat slip clearance
Boat slips shall provide clear pier space 60 inches (1524 mm) wide minimum and at least as long as the boat slips....
-
11B-1003.3.1 Boat slip clearance
Boat slips shall provide clear pier space 60 inches (1524 mm) wide minimum and at least as long as the boat slips....
-
1132A.4 Level floor or landing
The floor or landing on each side of a door shall be level....
-
8. Notice, Reporting, and Monitoring Requirements
Any such inspections shall be conducted (i) during non-show times within ten (10) business days of such notice and (ii) shall be limited to the requirements of the ADA with respect to (a...
-
11B-227.2 Check-out aisles
Where check-out aisles are provided, check-out aisles complying with Section 11B-904.3 shall be provided in accordance with Table 11B-227.2....
-
Guest Rooms
Guest rooms required to provide communication features shall comply with 806.3....
-
IV. ACCESSIBLE MEDICAL EQUIPMENT
Upon its completion, this report shall be provided to Plaintiffs’ counsel and the third-party Facilitator but shall otherwise remain confidential....
-
11B-804.6.6 Refrigerator/freezer
Combination refrigerators and freezers shall have at least 50 percent of the freezer space 54 inches (1372 mm) maximum above the finish floor or ground....
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
F233.3.3 Alterations
Alterations shall comply with F233.3.3....
-
611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor....
-
807.2.4 Toilet and Bathing Facilities
Toilet facilities or bathing facilities that are provided as part of a cell shall comply with 603....
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
233.3.6
233.3.6 All new single-family houses, duplexes, triplexes, condominiums, and townhouses shall provide at least one bathroom, located with maximum possible privacy, where bathrooms are provided...
-
11B-703.1.1.2 Inspection
Signs and identification devices shall be field inspected after installation and approved by the enforcing agency prior to the issuance of a final certificate of occupancy per Chapter 1,...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
11B-228.1 General
Where provided, at least one of each type of depository, vending machine, change machine, and fuel dispenser shall comply with Section 11B-309 _|Operable Parts|_....
-
Sec. 469.102(b)
(b) The person shall submit the plans and specifications not later than the 20th day after the date the person issues the plans and specifications....
-
1007.6.2 Separation
Each area of refuge shall be separated from the remainder of the story by a smoke barrier complying with Section 709....
-
807.2.4 Toilet and Bathing Facilities
Toilet facilities or bathing facilities that are provided as part of a cell shall comply with 603....