(7) The employees you designate as CROs, for purposes of §382.151 of this part, must receive training concerning the requirements of this part and the duties of a CRO....
Search Results "Safety Requirement"
Filters
Commonly Searched Documents
-
§382.141(a)(7)
-
M302.3.1 Transfer Supports
Transfer supports shall be provided for use with transfer sides required by M302.2.4 and shall comply with M305.2.1.1, M305.2.2.1, and M305.2.3 through M305.2.8....
-
F206.5.1 Entrances
Each entrance to a building or facility required to comply with F206.4 shall have at least one door, doorway, or gate complying with 404....
-
206.7.2 Wheelchair Spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of 221 and 802....
-
804.6.5.1 Side-Hinged Door Ovens
Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door....
-
§ 1194.3(f)
(f) Products located in spaces frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment are not required to comply with this part....
-
STEP 3
Table 240.2.1.2 requires a minimum of 1....
-
206.5.1 Entrances
Each entrance to a building or facility required to comply with 206.4 shall have at least one door, doorway, or gate complying with 404....
-
Is Identification of the Path(s) to the Means of Egress Necessary?
No Special Requirements. Once notified, people who are deaf or hard of hearing can read and follow standard exit and directional signs....
-
5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height
Edge protection is not required on platforms 1 ½ inches or less in height....
-
F206.7.2 Wheelchair Spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of F221 and 802....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
T302.1 General
EXCEPTION: Walking surfaces on lifts shall not be required to comply with T302....
-
Proposed standards
Proposed standards means the requirements set forth in appendices B and D to 36 CFR part 1191 as adopted by the Department of Justice. * * * * *...
-
302.1 Without Vision
Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that does not require user vision....
-
502.1 General
EXCEPTION: ICT conforming to 402 shall not be required to conform to 502....
-
§27.11(a)(3)
(3) The responsible Departmental official may, where necessary to overcome the effects of a violation of this part, require a recipient to take remedial action:...
-
11B-216.8.1 Geometric symbols
Provides Exceptions 1 and 2 for locations where geometric symbols are not required....
-
11B-216.6 Entrances
NOTES 11B-216.6 Entrances Removes redundant exceptions for providing an ISA for specific entrances which are not required...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
SECTION TITLE NOTES 11B-703.7.2.6.4 Edges and vertices on geometric symbols Provides detailed technical requirements...
-
§ 36.302(f)(8) Prevention of fraudulent purchase of accessible seating
A public accommodation may not require proof of disability before selling a wheelchair space. ...
-
302.4 Without Hearing
Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that does not require user hearing....
-
List of Subjects in 28 CFR part 35
Administrative practice and procedure, Buildings and facilities, Civil rights, Communications, Individuals with disabilities, Reporting and recordkeeping requirements, State and local governments...
-
§ 35.138(h) Prevention of fraudulent purchase of accessible seating
A public entity may not require proof of disability before selling a wheelchair space....