(2) If doorways connecting adjoining cars in a multi-car train are provided, and if such doorway is connected by an aisle with a minimum clear width of 30 inches to one or more spaces where...
Search Results "Line Spacing (Visual)"
-
§ 38.73(a)(2)
-
1132A.1 Primary entry doors and required exit doors
The requirements of Sections 1126A.3 shall apply to maneuvering clearances at the side of the door exposed to common or public use spaces (e.g., entry or exit doors which open from the covered...
-
11B-230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
-
1132A.1 Primary entry doors and required exit doors
The requirements of Sections 1126A.3 shall apply to maneuvering clearances at the side of the door exposed to common or public use spaces (e.g., entry or exit doors which open from the covered...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
Technically Infeasible
altering a load-bearing member that is an essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces...
- Kompan, Inc. M141 - Spring Seesaw
- Kompan, Inc. M590 - Mermaid's Fountain
- Ultratec Miniprint 425 TTY
- Symmons Temptrol II (BP Series) Shower System BP-56-500-B30-V
- American Standard Colony Soft Deck-Mount Tub Filler
- CRL-Blumcraft® Panic Handles 08 7100
-
Background
Evan Terry Associates has developed a detailed (line-by-line) reverse sortable analysis to show how the 2010 ADA Standards compare to the 1991 ADA Standards....
-
Background
Evan Terry Associates has developed a detailed (line-by-line) reverse sortable analysis to show how the 2010 ADA Standards compare to the 1991 ADA Standards....
-
Technical Memorandum TM 2013-20 Valet Parking
The 1994 TAS (and 1991 ADAAG) required valet parking facilities to provide a passenger loading zone but exempted the facilities from providing accessible passenger and van parking spaces...
-
Ground Surfaces
Section 1008.2.6 of the 2010 Standards provides technical requirements for accessible ground surfaces for play areas on accessible routes, clear floor or ground spaces, and turning spaces...
-
Grab Bar Cross Sections
For consistency with specifications for handrails, the Board has revised requirements for size (609.2) and spacing (609.3)....
-
F205.1 General
Operable parts on accessible elements, accessible routes, and in accessible rooms and spaces shall comply with 309. EXCEPTIONS: 1....
-
Protruding Objects [1017.9]
Objects that protrude into the trail clear tread width, passing spaces, and resting intervals can pose hazards to people who are blind or have low vision....
-
G.5.ii. - How is the "back office" exception applied?
First, the agency must intend to locate the product in a physical space frequented only by service personnel....
-
Accessible Round Table Style
Aisles between round tables require at least three feet of space between the tables (measured from the back of one chair to the back of the chair directly behind it)....
-
4.1.6(3)(d)
EXCEPTION: If the cost of the elements and spaces required by 4.1.6(3)(a), (b), or (c) exceeds 15 percent of the total cost of all other alterations, then a schedule may be established by...
-
205.1 General
Operable parts on accessible elements, accessible routes, and in accessible rooms and spaces shall comply with 309. EXCEPTIONS: 1....
- Georgia-Pacific Compact Quad® Vertical Four Roll Coreless Tissue Dispenser 56746