A public entity must provide information on title II's requirements to applicants participants, beneficiaries, and other interested persons....
Search Results "Supplemental Requirement"
Filters
Commonly Searched Documents
-
II-8.4000 Notice to the public
-
11B-604.8.1.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
11B-206.2.3.2 Distance to Elevators
In new construction of buildings where elevators are required by Section 11B-206.2.3, and which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via...
-
CHAPTER 11A HOUSING ACCESSIBILITY
It is beyond the scope of this Guide to compare the requirements of CBC Chapter 11A with Federal accessibility requirements related to housing....
-
11B-209.2.1 Passenger drop-off and loading zones
Passenger drop-off and loading zones, except those required to comply with Sections 11B-209.2.2 and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying...
-
11B-211.2 Minimum number
The 2019 California Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in...
-
206.5.4 Residential Dwelling Units
In residential dwelling units required to provide mobility features complying with 809.2 through 809.4, all doors and doorways providing user passage shall comply with 404....
-
Conducting TTY Calls
Effective communication by TTY will require call takers to be familiar with the use of TTY equipment and TTY protocols....
-
11B-1009.3.1 Sloped entries
Exception: Where sloped entries are provided, the surfaces shall not be required to be slip resistant....
-
§382.15(c)
You are not required to include such an assurance in contracts with foreign travel agents....
-
§382.15(a)
(a) As a carrier, you must make sure that your contractors that provide services to the public (including airports where applicable) meet the requirements of this part that would apply to...
-
1630.13(b)
Except as permitted by section 1630.14, it is unlawful for a covered entity to require a medical examination of an employee or to make inquiries as to whether an employee is an individual...
-
§382.83(a)
., offer seat assignments to passengers before the day of the flight), you must comply with the requirements of §382.81 of this part by any of the following methods:...
-
11B-1008.3.2 Transfer steps
Transfer steps shall be provided where movement is intended from transfer platforms to levels with elevated play components required to be on accessible routes....
-
§382.143(a)(3)
(3) For crewmembers subject to training requirements under 14 CFR Part 121 or 135 whose employment in any given position commences after May 13, 2009, before they assume their duties; and...
-
§382.141(a)
(a) As a carrier that operates aircraft with 19 or more passenger seats, you must provide training, meeting the requirements of this paragraph, for all personnel who deal with the traveling...
-
RECOMMEND
[DSA-AC, HCD 1 & HCD 2] Does not require mandatory acceptance, but identifies a suggested action that shall be considered for the purpose of providing a greater degree of accessibility...
-
§382.133(f)(4)
(4) The requirement to bring an adequate number of batteries as outlined in paragraph (h)(2) of this section and to ensure that extra batteries carried onboard to power the device are packaged...
-
Integration
In the final rule, the Board has clarified this requirement to state that wheelchair spaces "shall be an integral part of the seating plan."...
-
§ 1194.31(c)
(c) At least one mode of operation and information retrieval that does not require user hearing shall be provided, or support for assistive technology used by people who are deaf or hard...
-
404.2.8.1 Door Closers and Gate Closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
202.2 Additions
Each addition to an existing building or facility shall comply with the requirements for new construction....
-
R411 International Symbol of Accessibility (Section-by-Section Analysis)
R411 International Symbol of Accessibility (Section-by-Section Analysis) The technical requirements ramps, stairways, handrails, visual characters on signs, and the International Symbol...
-
R218 Doors, Doorways, and Gates (Section-by-Section Analysis)
R218 Doors, Doorways, and Gates (Section-by-Section Analysis) Doors, doorways, and gates to pedestrian facilities such as transit shelters must comply with applicable technical requirements...