Often, foot travel is allowed beyond the restriction device. When foot travel is encouraged on the other side of the barrier, passage for someone in a wheelchair must be provided....
Search Results "Travel"
Filters
Commonly Searched Documents
-
Road Closure Drawings
-
Trail Type
A category that reflects the predominant trail surface and general mode of travel accommodated by a trail....
-
Skating Skill and Performance
For example, novice skaters typically travel more slowly and have a narrower sweep width than advanced skaters.(8) Skaters choose among several different techniques to stop, often based...
-
Schumacher 1400 Series Limited Use Limited Application (LULA) Elevator
Capacity Up to 1,400 lbs Travel Low-rise buildings Up to 25 ft of rise Speed Up to 30 fpm...
-
§382.119(b)
information includes but is not limited to the following: information concerning flight safety, procedures for takeoff and landing, flight delays, schedule or aircraft changes that affect the travel...
-
End Note
Good customer service practices that assist people with disabilities will bring repeat business from guests with disabilities, older travelers, and friends and families that accompany this...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel. Cross slope is measured the same way as slope is measured (i.e., the rise over the run)....
-
Wheelchair
A person whose disability requires use of a wheelchair or mobility device may use a wheelchair or mobility device that meets both parts of this definition anywhere foot travel is permitted...
-
1.1.3 Walk running slope
Measure for overall running slope (the primary direction of travel) by determining elevations at the ends of the walk, noticeable changes in slope, or at a maximum of 20 ft (6 m) intervals...
-
6.3 Operational Considerations
6.3 Operational Considerations: In situations where a fully compliant path of travel cannot be required, from a civil rights perspective the public agency operating the facility still has...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel. Cross slope is measured the same way as slope is measured (i.e., the rise over the run)....
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
-
Location: ADA Standard Section 206.3
Section 206.3 covers scoping requirements in the most current ADA Standards for the required locations of accessible routes.
-
Symmetry Limited Use/Limited Application (LU/LA) Elevator
The Elevation is ideal for applications up to six stops and 25 feet (standard) or 40 feet (with approved variance) of travel....
-
indoo.rs® Indoor Navigation Solution App
Travel Indoor navigation provides travelers at airports, railway-stations, etc. with mobile assistance; for example guiding them to the right place – specific gates, VIP lounges, information...
-
§382.53(b)
., offers of compensation for surrendering a reservation), individuals being paged by airlines, aircraft changes that affect the travel of persons with disabilities, and emergencies (e.g...
-
11B-216.13.1 Use of Cleaner Air Symbol
Section 11B-216.13.3, a Cleaner Air Symbol complying with Section 11B-703.7.2.5 is permitted to be posted in compliance with Section 11B-216.3 to indicate rooms, facilities, and path of travels...
-
12162(a)(4)(A)(ii)
which to eat, shall be provided to ensure that other equivalent food service is available to individuals with disabilities, including individuals who use wheelchairs, and to passengers traveling...
-
Clear Tread Width of Trails
Clear tread width is the width of traveled surface between obstacles on the ground and above the ground (figure 129). Provide at least 36 inches (915 millimeters) of clear tread width....
-
Additions [4.1.5]
Each addition to an existing building is regarded as an alteration subject to ADAAG alterations requirements (including triggering of path of travel obligations, if applicable)....
-
1016.6 Openings
Elongated openings should be placed so that the long dimension is perpendicular, or as close to perpendicular as possible, to the dominant direction of travel....
