Sloped concrete and asphalt surfaces are an excellent example of this problem. ...
Search Results "Surface"
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
-
4. Assess During the Planning, Installation and Maintenance Phases
Assess During the Planning, Installation and Maintenance Phases Once the playground surface is installed, an on-site inspection of the surface system should be conducted along the accessible...
- Inpro Corporation JointMaster® AR Series Seal Expansion Joint Systems
-
6. Recognize that Proper Installation of Play Surface Systems is Key
Recognize that Proper Installation of Play Surface Systems is Key An accessible surface system can be rendered useless if it is not properly installed....
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
-
Mirror Height
The guidelines specify that accessible mirrors be mounted so that the bottom edge of the reflecting surface is no higher than 40 inches (603.3)....
-
Development of Surface Roughness Standards for Pathways Used by Wheelchair Users: Final Report
Development of Surface Roughness Standards for Pathways Used by Wheelchair Users: Final Report December 2014 Human Engineering Research Laboratories VA Pittsburgh Healthcare System...
- Tile Tech Pavers® Traver-Pave™
- U.S. Tape Company, Inc. Digi-Pro
- Sargent 8700 Surface Vertical Rod Exit Device
-
Material Characteristics (slide 6)
Matte finishes (slide 6) are always better than specular surfaces or polished granite. And that can be columns, and it can even be lighting fixtures....
-
T302.1 General
Walking surfaces in non-rail vehicles shall comply with T302. EXCEPTION: Walking surfaces on lifts shall not be required to comply with T302....
-
11B-606.5 Exposed pipes and surfaces
There shall be no sharp or abrasive surfaces under lavatories and sinks....
-
11B-606.5 Exposed pipes and surfaces
There shall be no sharp or abrasive surfaces under lavatories and sinks....
-
National Trail Surfaces Study Final Report
National Trail Surface Study Final Report February 2014 Staff Liaison Bill Botten U.S....
- UltraPlay Engineered Wood Fiber Surface
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
This section requires the surface of outdoor recreation access routes, passing spaces, and resting intervals to be firm and stable....
- Tile Tech Pavers® Coral-Pave™
- Allen Face F-Meter® Rolling Floor Profiler