In detention and correctional facilities, common use areas that are used only by inmates or detainees and security personnel and that do not serve holding cells or housing cells required...
Search Results "Security Latch"
Commonly Searched Documents
-
11B-203.7 Detention and correctional facilities
-
Can accessible spaces required for one parking facility be located in another one instead?
The term “user convenience” applies to factors such as protection from the weather, security, lighting, and comparative maintenance....
-
Entrances
must provide a minimum width of 32 inches and there must also be enough room for a person using a wheelchair to maneuver to open the door, including 18 inches of clear space beyond the latch...
- Allegion Falcon 2390 Series Recessed Exit Device
- Jacknob Corp. 6150 ADA Partition Door Hardware
- Allegion Falcon 1490 Series Exit Devices
-
§ 38.161 Moveable aisle armrests
A minimum of 50% of aisle seats, including all moveable or removable seats at wheelchair or mobility aide securement locations, shall have an armrest on the aisle side which can be...
-
Dispersion of Cells
However, Advisory 232.2 of the 2004 ADAAG recommends that “[a]ccessible cells or rooms should be dispersed among different levels of security, housing categories, and holding classifications...
-
Dispersion of Cells. (Section-by-Section Analysis)
However, Advisory 232.2 of the 2004 ADAAG recommends that ‘‘[a]ccessible cells or rooms should be dispersed among different levels of security, housing categories, and holding classifications...
-
§1607.12 Retesting of applicants.
The user may however take reasonable steps to preserve the security of its procedures....
-
F211.1 General
Where drinking fountains are provided on an exterior site, on a floor, or within a secured area they shall be provided in accordance with F211....
-
§ 38.125(c)(7) Stowage
A compartment, securement system, or other appropriate method shall be provided to ensure that stowed ramps or bridge plates, including portable ramps or bridge plates stowed in the passenger...
-
§ 38.83(c)(7) Stowage
A compartment, securement system, or other appropriate method shall be provided to ensure that stowed ramps or bridge plates, including portable ramps or bridges plates stowed in the passenger...
-
§ 38.95(c)(7) Stowage
A compartment, securement system, or other appropriate method shall be provided to ensure that stowed ramps or bridge plates, including portable ramps or bridge plates stowed in the passenger...
-
211 Drinking Fountains
Scoping requirements apply where drinking fountains are provided on exterior sites, on floors, and within secured areas....
-
JURISDICTION
Subpart F, to determine the compliance of the SDA with title II of the ADA and the Department's title II implementing regulation, to issue findings, and, where appropriate, to negotiate and secure...
- Allegion Falcon 1690 Series Exit Devices
-
H21
Is a horizontal grab bar at least 40 inches long securely mounted on the adjacent side wall 33 to 36 inches above the floor with one end no more than 12 inches from the back wall 33 to 36...
- Norton Surface Mounted 7900 Series Overhead Door Closer
-
§382.121(a)(3)
them such as syringes or auto-injectors, vision-enhancing devices, and POCs, ventilators and respirators that use non-spillable batteries, as long as they comply with applicable safety, security...
-
11B-211.1 General
Where drinking fountains are provided on an exterior site, on a floor, or within a secured area they shall be provided in accordance with Section 11B-211....
-
§100.120(a)
engaging in residential real estate-related transactions to discriminate against any person in making available loans or other financial assistance for a dwelling, or which is or is to be secured...
-
11B-211.1 General
Where drinking fountains are provided on an exterior site, on a floor, or within a secured area they shall be provided in accordance with Section 11B-211. ...
-
11B-211.1 General
Where drinking fountains are provided on an exterior site, on a floor, or within a secured area they shall be provided in accordance with Section 11B-211....