by Subject Group Energy Consumption above Resting Values Rest ADAG RDOL ASPP RDMX PAFN DIRP CPBR EWFK EWFJ SAND...
Search Results "Sand Bottom Pool"
-
Energy Requirements for Different Surfaces
-
2.3.1 Comparison of Demographic Characteristics of Our Sample and U.S. Population of WhMD Users
WhMD users provided information about the generalizability of our pooled results with the U.S. population of WhMD users....
-
Element-by-Element Safe Harbor
These include recreation facilities such as swimming pools, play areas, exercise machines, miniature golf facilities, and bowling alleys....
-
§ 38.101(b)
have outside lights which, when the door is open, provide at least 1 footcandle of illumination on the station platform surface for a distance of 3 feet perpendicular to all points on the bottom...
-
§ 38.157(b)
vehicle doorway shall have outside light(s) which, when the door is open, provide at least 1 foot-candle of illumination on the pathway to the door for a distance of 3 feet (915 mm) to the bottom...
-
11B-611.4 Height
Front loading machines shall have the bottom of the opening to the laundry compartment located 15 inches (381 mm) minimum and 36 inches (914 mm) maximum above the finish floor....
-
611.4 Height
Front loading machines shall have the bottom of the opening to the laundry compartment located 15 inches (380 mm) minimum and 36 inches (915 mm) maximum above the finish floor....
-
ADDITIONAL INFORMATION ABOUT THE 2010 STANDARDS
What is the Department's approach going to be to ensuring compliance with the new regulation pertaining to pool lifts?...
-
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302
The Committee recommends the bottom of the transfer support have no obstructions affecting more than 20% of its length....
-
Parallel Curb Ramps (R304.3) (Section-by-Section Analysis)
A turning space must be provided at the bottom of parallel curb ramps....
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
-
11B-611.4 Height
Front loading machines shall have the bottom of the opening to the laundry compartment located 15 inches (381 mm) minimum and 36 inches (914 mm) maximum above the finish floor....
-
§ 38.119(b)
outside lights which, when the door is open, provide at least 1 foot-candle of illumination on the station platform surface for a distance of 3 feet perpendicular to all points on the bottom...
-
§ 38.81(c)
platforms shall have outside lights which provide at least 1 foot-candle of illumination on the station platform or street surface for a distance of 3 feet perpendicular to all points on the bottom...
-
11B-404.2.11 Vision lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
11B-404.2.11 Vision lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
Seton EZ-Roll Sign Stanchion Systems - Parking Sign PP244
Grab the nylon loop handle and roll sign smoothly along on the wheels at the base Fill the 24" base with sand or water to withstand wind gusts of up to 40 mph Weather-resistant...
-
4.1.4(4) ASSEMBLY
public areas) Dance halls Drive-in theaters Exhibition halls Fairs Funeral parlors Grandstands Gymnasiums Motion picture theaters Indoor & outdoor swimming pools...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
7(2)(b)(v)
If kneespace is provided below the vanity, the bottom of the apron is at least 2'3" above the floor. If provided, full kneespace (for front approach) is at least 1'5" deep....
-
A4.13.9 DOOR HARDWARE
To be effective, they should cover the door width, less approximately 2 in (51 mm), up to a height of 16 in (405 mm) form its bottom edge and be centered across the top....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
