(2) Ramp surface. The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater then 1/4 inch, shall have a clear width...
Search Results "High Speed Rail"
Filters
Commonly Searched Documents
-
§ 38.83(c)(2) Ramp surface
-
§ 38.113(e) Signage
(e) Signage. The International Symbol of Accessibility shall be displayed on the exterior of all doors complying with this section unless all cars and doors are accessible and are...
-
§ 38.95(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.125(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.95(b)(6) Platform surface
The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant....
-
Norton Surface Mounted 7100SZ Series SafeZone® Electromechanical Closer
operation Optional dual sensor (specify DZ when ordering) Optional selective hold open (specify S when ordering) Benefits: Anyone can travel through the opening at their own speed...
-
Design Speed
The selected design speed of a facility affects many aspects of geometric design....
-
§ 37.21(a)
(a) This part applies to the following entities, whether or not they receive Federal financial assistance from the Department of Transportation:
-
11B-206.4.4.1 Location
Exception: Entrances to key stations and existing intercity rail stations retrofitted in accordance with 49 CFR 37.49 or 49 CFR 37.51 shall not be required to comply with Section 11B-206.4.4.1...
-
T101.1 Purpose
These Non-Rail Vehicle Guidelines, which consist of Chapters 1 through 7, contain scoping and technical requirements for new, used or remanufactured non-rail vehicles to ensure their accessibility...
-
Allegion LCN 2030 Series Overhead Concealed Door Control
LCN 2030 Series The concealed 2030 Series Pacer® is a heavy duty closer designed to fit in a narrow, minimum 1 3/4” aluminum transom. The single lever arm and roller assembly...
-
Allegion LCN 3030 Series Overhead Concealed Door Control
LCN 3030 Series The concealed 3030 is designed to mount in a 1 3/4” interior door. The double lever arm provides superior door control and the choice of finishes and arm functions...
-
DORMA BTS75V SERIES DOOR CLOSER
Floor-Concealed Door Closer The BTS75V Series of floor-concealed door closers offer adaptability to almost any installation. The closer's compact body permits its use where a...
-
Allegion LCN 5030 Series Overhead Concealed Door Control
LCN 5030 Series The concealed 5030 Series PACER® is a heavy duty closer designed to fit in a narrow, minimum 1 3/4” aluminum transom. The double lever arm provides superior door...
-
Allegion LCN 2010 Series Overhead Concealed Door Control
LCN 2010 Series The concealed 2010 Series is a heavy duty closer designed to provide complete concealment. The single lever arm and roller assembly provide smooth, quiet door...
-
DORMA BTS80 EMB Series Door Closer
Floor-Concealed Door Closer with Electromagnetic Hydraulic Hold Open The BTS80 EMB Series is an aesthetically pleasing floor closer for fire and life safety, remote release and...
-
Allegion LCN 3130 Series Overhead Concealed Door Control
LCN 3130 Series The concealed 3130 is designed to mount in a 1 3/4” interior door. The single lever arm and roller assembly provides complete concealment and the choice of...
-
206.4.4.1 Location
EXCEPTION: Entrances to key stations and existing intercity rail stations retrofitted in accordance with 49 CFR 37.49 or 49 CFR 37.51 shall not be required to comply with 206.4.4.1....
-
206.4.4.1 Location
EXCEPTION: Entrances to key stations and existing intercity rail stations retrofitted in accordance with 49 CFR 37.49 or 49 CFR 37.51 shall not be required to comply with 206.4.4.1....
-
T505 Fare Collection Devices
[See subsections ...]
-
T602 Wheelchair Spaces
[See subsections ...]
-
T304 Operable Parts
[See subsections ...]
-
T505.3 Location of Operable Parts
Operable parts shall be located so that they are reachable by passengers using wheelchair when parked in a clear space 30 inches (760 mm) wide minimum and 48 inches (1220 mm) long...
-
7. In § 37.103 (b) and (c), remove the words “or an over-the-road bus,”
§ 37.103 [Amended] 7. In § 37.103 (b) and (c), remove the words “or an over-the-road bus,”.
