Installation of Aggregate Surfaces at Bradford Woods The installation of the aggregate surfaces at Bradford Woods conformed to the following protocol: Prior to installing the crushed...
Search Results "Extended Floor Surface"
Filters
Commonly Searched Documents
-
Installation of Aggregate Surfaces at Bradford Woods
-
Stabila, Inc. Tech Digital Electronic Level Type 196-2
Electronic measuring technology / Two digital displays / Audible inclination guide / IP 65 Dust and Waterproof / Removable shock-absorbing end caps with anti-slip wall...
-
Stabila, Inc. Magnetic Tech Digital Electronic Level Type 96M-2
Electronic measuring technology / Two digital displays / Audible inclination guide / IP 65 Dust and Waterproof / Rare earth magnets for hands free use / Removable shock-absorbing end...
-
903.2 Clear Floor or Ground Space
903.2 Clear Floor or Ground Space....
-
Figure 405.9.1 Extended Floor or Ground Surface Edge Protection – Drawing from the U.S. Access Board
-
Envirobond is Self-Healing
If cracking or movement occurs, rain water reactivates the plant-based glue, Organic-Lock™, allowing the joint material to re-mould and fill any cracks.
-
Organic-Lock: The Self-Healing Organic Binder
Organic-Lock is the strongest organic binder on the market! Designed to be mixed with aggregate to produce a stabilized and natural pathway.
-
Envirobond Deters Weeds
Envirobond has a 2 level weed-deterring system involving Organic-Lock™ and a scientifically elevated pH.
-
Maneuvering Clearance: ADA Standard Section 305.7
Section 305.7 covers the current ADA Standards for additional maneuvering clearance needed when the clear floor or ground space is located in an alcove.
-
16. If a play surface is replaced with an accessible surface and the existing ground level play components are not accessible, do the components need to be replaced?
If a play surface is replaced with an accessible surface and the existing ground level play components are not accessible, do the components need to be replaced? No....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
TotTurf® and Robertson Industries Poured Rubber Surfaces
Full Assortment of Colors Available 1/2” Wear Course Splash Tread Aquatic Surfacing Aquatic Surfacing is a superior surface treatment that is extremely tough yet soft...
-
Slope Meters and Levels
Corada has reviewed several models of slope meters and levels to assist accessibility surveyors in measuring slope and level changes. The following are the models that can be...
-
R302.7 Surfaces
R302.7 Surfaces....
-
M301.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
4.3.5 Transfer Height
Tent platform surfaces that are not the same elevation as the ORAR shall be between 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the floor or ground surface adjacent to...
-
Rollability and Smoothness of Walking Surfaces
surfaces....
-
4.18.3 Clear Floor Space
A clear floor space 30 in by 48 in (760 mm by 1220 mm) shall be provided in front of urinals to allow forward approach....
-
4.18.3 CLEAR FLOOR SPACE
A clear floor space 30 in by 48 in (760 mm by 1220 mm) shall be provided in front of urinals to allow forward approach....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
Test Procedures
The procedures are based on a draft national standard test method for the firmness and stability of ground and floor surfaces (RESNA 2000), which uses an average of five readings....
