As discussed in Section IV.B.1.c (Significant Changes – Transfer Surface Size), in the final rule the Access Board has revised this provision to account for the two types of transfer surfaces...
Search Results "9-1-1 Service"
Filters
Commonly Searched Documents
-
M301.2.3 Size (Section-by-Section Analysis)
-
M304.2.2 Standing Supports (Section-by-Section Analysis)
As discussed above in the Section IV.D.1. (Significant Changes – Standing Supports) and IV.E.2....
-
§ 1194.24(a)
As soon as practicable, but not later than July 1, 2002, widescreen digital television (DTV) displays measuring at least 7.8 inches vertically, DTV sets with conventional displays measuring...
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Seats
The deck surface between the centerline of the seat and the pool edge cannot have a slope greater than 1:48....
-
604.5.2 Rear Wall
EXCEPTIONS: 1....
-
QUALIFIED INTERPRETERS
QUALIFIED INTERPRETERS 1....
-
702.1 General
alarm systems shall have permanently installed audible and visible alarms complying with NFPA 72 (1999 or 2002 edition) (incorporated by reference, see “Referenced Standards” in Chapter 1)...
-
702.1 General
alarm systems shall have permanently installed audible and visible alarms complying with NFPA 72 (1999 or 2002 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)...
-
1009.3.3 Handrails
EXCEPTIONS: 1. Handrail extensions specified by 505.10.1 shall not be required at the bottom landing serving a sloped entry. 2....
-
407.2.2.3 Audible Signals
EXCEPTIONS: 1....
-
F105.1 General
The Director of the Federal Register has approved these standards for incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51....
-
206.4 Entrances
EXCEPTIONS: 1....
-
407.2.2.3 Audible Signals
EXCEPTIONS: 1....
-
F206.4 Entrances
EXCEPTIONS: 1....
-
608.3 Grab Bars
EXCEPTIONS: 1....
-
Technical Memorandum TM 2013-11 Benches
TM 2013-11 Benches Effective Date: June 1, 2013 2012 TAS Reference: 903 Based on information received from the U.S....
-
Measuring Surface Firmness and Stability
The rotational penetrometer (RP) is a precision surface-indenter measuring tool for evaluating the firmness and stability of ground and floor surfaces (figure 1). ...
-
1008.2.4.1 Ground Level
EXCEPTIONS: 1....
-
404.2.9 Door and Gate Opening Force
The force for pushing or pulling open a door or gate other than fire doors shall be as follows: 1. Interior hinged doors and gates: 5 pounds (22.2 N) maximum. 2....
-
2.5.2.2 International Organization for Standardization (ISO) Standards
Risk management plays a critical and central role in the design of medical devices, and it also ties into IEC 60601-1 and FDA’s expectations for quality systems and premarket clearance or...