Trim Style and Depth: Recessed - 3/8" flat trim or trimless.Semi-Recessed - 1 1/4", 1 1/2" Square Edge or 2 1/2", 3", 4"(Recessed Pull), 4 1/2" Rolled Edge. ...
Search Results "9-1-1 Service"
-
Activar JL Industries Ambassador Series 1017F10 Steel Fire Extinguisher Cabinets
-
B. Legal foundation for equipment and furniture coverage
Title II of the ADA applies to services, programs, or activities of public entities within the meaning of 42 U.S.C. 12133(1)(A)....
-
C101.2 Equivalent Facilitation (Section-by-Section Analysis)
alternative technological solutions for accessibility beyond those specified in the guidelines derives from the Appendix to 36 CFR Part 1193 - Advisory Guidance, Introduction, paragraph 1,...
-
602.1 General (Section-by-Section Analysis)
are derived from §§ 1194.41 and 1193.33 of the existing 508 Standards and 255 Guidelines respectively, but the requirement that electronic documentation comply with WCAG 2.0 or PDF/UA-1...
-
2.9 Conditions Not Considered Disabilities.
Examples of such conditions include: 1. 28 CFR § 35.104. Sexual behavior disorders; 2. 28 CFR § 35.104....
-
1017.4.1 Size
The passing space shall be either: 1. A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or 2....
-
3.4 Cinemark at Macedonia, 8161 Macedonia Commons Blvd., Macedonia, Ohio
., Macedonia, Ohio - In Auditorium 1, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium from their current location....
-
1007.3.2 Golf Club Reach Range Area
shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum having a running slope not steeper than 1:...
-
302.1 General
EXCEPTIONS: 1. Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2....
-
302.1 General
EXCEPTIONS: 1. Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2....
-
1007.8 Exterior area for assisted rescue
the interior of the building, the building exterior walls within 10 feet (3048 mm) horizontally of a nonrated wall or unprotected opening shall be constructed as required for a minimum 1-...
-
308.3.1 Unobstructed
EXCEPTIONS: 1. An obstruction shall be permitted between the clear floor or ground space and the element where the depth of the obstruction is 10 inches (255 mm) maximum. 2....
-
Obstacles [1018.5]
When beach access routes are constructed of materials other than concrete, asphalt, or boards, obstacles cannot exceed 1 inch in height at their highest point....
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
Detailed Age Demographics
12 45-54 30 55-64 25 65-74 4 75-84 1...
-
1003.2.13.7 Exterior area for assisted rescue
the interior of the building, the building exterior walls within 10 feet (3048 mm) horizontally of a nonrated wall or unprotected opening shall be constructed as required for a minimum 1-...
-
H.2. - Does Section 508 apply to a Federal agency's existing EIT procured prior to June 21, 2001?
(For a discussion on how maintaining EIT which existed prior to June 21, 2001 may be subject to the enforcement provisions of Section 508, see sections G.7, G.8, and H.1)....
-
606.3 Height
EXCEPTIONS: 1....
-
607.4 Grab Bars
EXCEPTIONS: 1....
-
§35.151(c)
. _____) shall be deemed to comply with the requirements of this section with respect to those facilities, except that the elevator exemption contained at §4.1.3(5) and §4.1.6(1)(j) of ADAAG...
-
[A] 104.11 Alternative materials, design and methods of construction and equipment
ETA Editor's Note DSA-AC has adopted Section 104.11 as follows, effective July 1, 2015: [A] 104.11 Alternative materials, design and methods of construction and equipment. ...
-
1134A.6, Item 7
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or ¼ inch (6.35 mm) when laminated, and shall pass the test requirements of this...