Where operators provide a biceps curl machine and cable-cross-over machine, both machines are required to meet the provisions in this section, even though an individual may be able to work...
Search Results "Technical Requirement"
Filters
Commonly Searched Documents
-
11B-236.1 General
-
11B-407.2.2.3 Audible signals
Existing elevators shall not be required to comply with the requirements for frequency and dB range of audible signals. ...
-
11B-236.1 General
Where operators provide a biceps curl machine and cable-cross-over machine, both machines are required to meet the provisions in this section, even though an individual may be able to work...
-
11B-406 Curb ramps, blended transitions and islands
The differences between 2010 ADA Standards Section 406 and CBC Section 11B-406 are numerous, as indicated by the italicized text, which is used by DSA-AC to identify departures from ADA requirements...
-
g. Discussion of Significant Regulatory Alternatives That Minimize Impact on Small Entities
That is, while the Department believes this regulatory action is required to support and enforce the ADA’s effective communication mandate, the proposed requirements also are intended to...
-
1. INTRODUCTION
While for a number of technical and convenience reasons neither hard wire or AM radio systems are used very much nowadays, it is nevertheless instructive to note that the need and advantages...
-
APPENDIX A
While the brand name of the surface product will be kept confidential, this study will require that the vendor provide laboratory testing results pertinent to ASTM F1292‒99/04, F1951‒99,...
-
11B-608.6 Shower spray unit and water
. ◼ ETA Editor's Note The 2010 ADA Standards Exception at 608.6 does not require the consideration of excessive vandalism or the installation of two shower heads where fixed ones are...
-
§382.51(a)
(a) As a carrier, you must comply with the following requirements with respect to all terminal facilities you own, lease, or control at a U.S. airport:...
-
§382.101(c)
(c) You are using an aircraft subject to an exception from the lift boarding and deplaning assistance requirements under §382.97(a)-(c) of this subpart;...
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
804.6.5.1 Side-Hinged Door Ovens
Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door....
-
809.5 Residential Dwelling Units with Communication Features
Residential dwelling units required to provide communication features shall comply with 809.5....
-
221.3 Companion Seats
At least one companion seat complying with 802.3 shall be provided for each wheelchair space required by 221.2.1....
-
§382.69(b)
(b) The requirements of paragraph (a) of this section go into effect with respect to audio-visual displays used for safety purposes on November 10, 2009....
-
§382.85(a)(2)
(2) If you use the “designated priority seats” mechanism of §382.83(a)(2) of this part, you must implement the requirements of this section as follows:...
-
§382.141(a)(7)
(7) The employees you designate as CROs, for purposes of §382.151 of this part, must receive training concerning the requirements of this part and the duties of a CRO....
-
M302.3.1 Transfer Supports
Transfer supports shall be provided for use with transfer sides required by M302.2.4 and shall comply with M305.2.1.1, M305.2.2.1, and M305.2.3 through M305.2.8....
-
F206.5.1 Entrances
Each entrance to a building or facility required to comply with F206.4 shall have at least one door, doorway, or gate complying with 404....
-
206.7.2 Wheelchair Spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of 221 and 802....
-
804.6.5.1 Side-Hinged Door Ovens
Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door....
-
§ 1194.3(f)
(f) Products located in spaces frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment are not required to comply with this part....
-
STEP 3
Table 240.2.1.2 requires a minimum of 1....
-
206.5.1 Entrances
Each entrance to a building or facility required to comply with 206.4 shall have at least one door, doorway, or gate complying with 404....