., floor material changes at door thresholds) shall not exceed ½ inch (12.7 mm). Thresholds shall comply with the following:...
Search Results "Clear Floor Area"
Commonly Searched Documents
-
1132A.4.1 Thresholds
-
11B-809.10.8.1 Location
The top of the lavatory rim shall be 34 inches (864 mm) maximum above the finished floor....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
2. Prioritization of Access Improvements
Other areas, such as residential neighborhoods and undeveloped areas....
-
R305.1.4 Size
At boarding platforms for buses and rail vehicles, detectable warning surfaces shall extend the full length of the public use areas of the platform....
-
D. Chapter 3: Building Blocks
Chapter 3 in the 2016 Non-Rail Vehicle Guidelines contains the technical requirements related to three areas—walking surfaces (T302), handrails, stanchions, and handholds (T303), and operable...
-
F247.4 Trail Facilities
This section requires camping facilities, picnic facilities, and viewing areas provided on trails to comply with the applicable scoping requirements for the facilities in F244 through F246...
-
Evaluation of transfers
ADAAG guidelines for pools and spas have recognized that people do not necessarily transfer parallel to the transfer target and suggest a clear deck area of 60” by 60” for transfer walls...
-
Determine Your Evacuation Options When Traveling
When staying in hotels/motels/cruise ships and other lodging facilities: When you have a choice, do you think about whether you want the view or the safety of a lower floor?...
-
M301.2.1, M302.2.1 Transfer Height
Transfer Height Proposed requirement: The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor...
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
- Wingits Reversible L-shaped 26" x 22.5" Shower Seat
- Cybex Total Access Upright Bike
-
Vertical Access to Mezzanines
While elevators, where provided, must serve all stories, including mezzanines where provided, ADAAG has not been clear on whether some form of vertical access is nonetheless required to...
-
Conclusion
There is a clear distinction between 49 CFR § 37.43(a)(1) and (a)(2)....
-
O. Accessible Portable Toilets
Accessible portable toilets should similar features to a standard accessible toilet stall including an accessible door, side and rear grab bar, clear space next to the toilet, and maneuvering...
-
§35.172 Resolution of complaints (Section-by-Section Analysis)
The Committee Reports make clear that Congress intended to provide a private right of action with the full panoply of remedies for individual victims of discrimination....
-
New Construction. (Section-by-Section Analysis)
The NPRM did not expressly propose that new construction of correctional and detention facilities shall comply with the proposed standards because the Department assumed it would be clear...
-
§382.91(c)
(c) As a carrier at a U.S. airport, you must, on request, in cooperation with the airport operator, provide for escorting a passenger with a service animal to an animal relief area provided...
-
1011.4, Item 4
Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1011.1, shall be identified by a tactile exit sign with the words “EXIT...