Contrast in percent is determined by: Contrast=[B−B)/B]×100 Where B=light reflectance value (LRV) of the lighter area and B=light reflectance value (LRV) of the darker area....
Search Results "Clear Floor Area"
-
II. Color Contrast—Step Edges, Lift Platform Edges
-
11B-201.3 Temporary and permanent structures
Temporary buildings or facilities covered by these requirements include, but are not limited to, reviewing stands, temporary classrooms, bleacher areas, stages, platforms and daises, fixed...
-
§35.190 Designated Agencies
These classes of recipients are funded by numerous agencies and the logical connection to a lead agency is clear (e.g., the Department of Education for colleges and universities, and the...
-
Annex A THE ADA: A BEGINNING
But there are differences even in those areas, some small, some great....
-
Brief Answers
each dictate that costs and cost-disproportionality may be considered by a public entity only under circumstances where a public entity is undertaking an alteration to a primary function area...
-
106.5.25 Disproportionality
Alterations made to provide an accessible path of travel to the altered area will be deemed disproportionate to the overall alteration when the cost exceeds 20% of the cost of the alteration...
-
B. Executive Order 13132 (Federalism)
With regard to preemption, this final rule preempts State law in the area of disability civil rights in air transportation....
- Sennheiser SZI 30 Transmitter or Modulator
-
6. Recognize that Proper Installation of Play Surface Systems is Key
Left unattended over time, areas where the top granular layer has flaked away can lead to non-compliant clear ground space at play equipment such as swings, transfer systems and the egress...
-
210 Stairways
developed in previous rulemaking on play areas (Exception 4)....
-
232.2 General Holding Cells and General Housing Cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....
-
Parking
Parking areas may lack accessible parking spaces with adequate access aisles and signs, or may be on a sloped surface....
-
Designated Aisle Seats
Section 4.1.3(19)(a) of the 1991 Standards requires one percent (1%) of fixed seats in assembly areas to be designated aisle seats with either no armrests or folding or retractable armrests...
-
Issue 14: How can improved lighting and zero net energy goals by achieved while improving health care?
I’m not an expert in that area. But we are establishing them on some lighting. Question by Jim Woods: So you have lighting minimums? Response by Kurt Knight: Right....
-
11B-202.3 Alterations
Risk is minimized when there is clear evidence that proactive measures have been taken to enable individuals with varying types of disabilities to acquire goods and services independently...
- Hussey Seating Company Roll-A-Way Seating
-
3.13(a) Placement of Wheelchair Spaces
Placement of Wheelchair Spaces Each wheelchair space shall comply with the size requirements set forth in § 4.33.2 of the Standards, be level and satisfy the floor surface requirements...
-
1132A.10 Door signal devices
The activating mechanism shall be mounted a maximum of 48 inches (1219 mm) above the floor and connected to permanent wiring....
-
5.8.3.1 Breast Platform Height
The height of the top of the breast platform should be decreased to 26 inches above the floor....
-
E. Grab Bars
Does each accessible toilet have a horizontal grab bar on the adjacent side wall that is at least 40" long and between 33"-36" above the floor for stabilization and assistance during transfer...
-
F. Grab Bars
Does each accessible toilet have a horizontal grab bar on the wall behind the toilet that is at least 36" long and between 33"-36" above the floor for stabilization and assistance during...
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....