Data Overview This chapter presents the data sources, research, and assumptions used to estimate the costs of the final rule. ...
Search Results "Common Use Area"
-
3. Data Overview
-
Chapter M3 Technical Criteria
in a supine, prone, or side-lying position (see M301); equipment used by patients in a seated position (see M302); equipment used by patients seated in a wheelchair (see M303); and equipment...
-
II. ENFORCING THE ADA PART 3
receives a large number of complaints from persons with disabilities about hotels, motels, and places of lodging, and consequently has dedicated considerable time and resources addressing common...
-
Introduction
The four issues identified for white papers were in the areas of: Effective Communication: What Visitors with Vision Loss Want Museums and Parks to Know about Effective Communication...
-
James E. Woods, Ph.D., P.E. Natural Lighting for Persons with Low Vision
Think of a 50,000 or 100,000-square-foot footprint of a building and try to penetrate 75 percent of that area....
-
M305 Supports
The technical criteria for transfer supports are discussed under M301 Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position and M302 Diagnostic Equipment Used by...
- Rebuilding Together Of Greater Green Bay - Green Bay, WI
-
Fine Motor Impairments
Fine Motor Impairments People with fine motor impairments may have limited use of one or both hands or no use of the hands and fingers....
-
B. Restrooms
The following is provided to assist manufacturers and designers to create restrooms which can be used by people with disabilities....
-
4. Organization of Technical Criteria
For example, imaging equipment can be designed for use by patients lying on a platform bed, in a standing or seated position, or seated in a wheelchair....
-
11B-220.2 Point-of-sale devices
Exceptions: Where a single point-of-sale device is installed for use with any type of motor fuel, it shall comply with Sections 11B-707.2, 11B-707.3, 11B-707.7.2, and 11B-707.9....
-
11B-1009.2.7 Operation
Controls and operating mechanisms shall be unobstructed when the lift is in use and shall comply with Section 11B-309.4....
-
11B-1009.2.7 Operation
Controls and operating mechanisms shall be unobstructed when the lift is in use and shall comply with Section 11B-309.4....
-
11B-220.2 Point-of-sale devices
Exceptions: Where a single point-of-sale device is installed for use with any type of motor fuel, it shall comply with Sections 11B-707.2, 11B-707.3, 11B-707.7.2, and 11B-707.9....
-
Section 1630.1(a) Purpose
plays a central role in enforcing the standards articulated in the ADA on behalf of individuals with disabilities; and to invoke the sweep of congressional authority to address the major areas...
-
Check Optional Features, if available
crosswalk during the following pedestrian phase (FDW), and walk across the street during the pedestrian phase and evaluate placement and aiming of devices for providing sound in the crosswalk area...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Accessible Routes
must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space,head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
Transfer Height
Transfer Height The height of the transfer device must be between 14 and 24 inches above the load and unload area surface....
-
Outdoor Constructed Features Along Trails [F247.5]
provided along a trail, at least 20 percent, but no less than one, of each type of element provided at each location on the trail (other than within camping and picnic facilities and viewing areas...
-
12101(a)(3)
(3) discrimination against individuals with disabilities persists in such critical areas as employment, housing, public accommodations, education, transportation, communication, recreation...
-
4.4.1 General
Section 4.3.1 does not apply to built-in benches provided in assembly areas such as amphitheaters. These benches are covered by sections F221.2.1.1, F221.2.2, and 903 of the ABAAS....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of 1/2 inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Places of Public Accommodation and Commercial Facilities
listed in the statute, including stores and shops, restaurants and bars, sales or rental establishments, service establishments, theaters, places of lodging, recreation facilities, assembly areas...